HP SureStore AutoBackup Administrator's Guide - Not Orderable

autoloader's operation. If a fault has been detected with the mechanism, or loss of
data may result, the error message may be accompanied by the Operator Attention
Required light being on or flashing. This is indicated in the OAR column in the
alphabetical list of messages below. Where possible, actions you can take to recover
from the error are also given.
Information Messages
Information messages are displayed when power is applied to the autoloader. They
indicate its identity, SCSI ID and configuration. They also tell you when you have
pressed the front panel buttons to confirm that the autoloader has recognized the
action.
HP SureStore DAT40x6 and Number
Codes
The HP SureStore DAT40x6 autoloader has a language selection feature, which
allows you to localize the display for French, German, Spanish, Portuguese or
Japanese. If your language is not supported, you can select a Numerical code instead
and refer to the Messages section below for an explanation of the code. The
messages are in alphabetical order, but you can jump directly to the required message
by selecting the number from the following list:
0000 1001 2001 3001 4000 8000
1002 2002 3002 4001 8001
1003 2003 3003 4002 8002
1004 2006 3004 4003 8003
1006 2007 3005 8004
1007 2008 8006
1008 2009 8007
1009 2010 8007
1010 8008
1011 8009
1012 8010
1013 8012
1014 8013
1015 8014
1016 8015
1017 8016
1018 8017
Front Panel Lights, Autoloader
file:///D|/ADMIN_~1/eng/tape/lights_a.htm (7 of 17) [5/3/2000 3:33:43 PM]