HP SureStore AutoBackup Administrator's Guide - Not Orderable

8003
Load Fail:
Try New
Tape
E F
A load command has failed, or a
load or change partitions command
has failed to read the system area of
the tape, which stores information
about tape usage.
Action: Use a new cartridge.
8007
Load Fail:
Press
Eject
E F
A load command has failed, or a
load or change partitions command
has failed to read the system area of
the tape, which stores information
about tape usage.
Action: Press the Eject button.
1021
Load Lock
I
Manual loading is locked (Media
Removal Prevented).
2009
Load Tape
I
This is displayed when you press the
Load Cartridge button.
1003
Loading
S
Either a cartridge is being moved
from the magazine and placed into
the drive mechanism, or the drive is
loading a cartridge.
1016
Locate
S
The drive is moving the tape to a
point specified by the host.
1002
Mag Check
S
The autoloader is examining the
magazine to determine which slots
are occupied.
1001
Mag Eject
S
The autoloader is ejecting the
magazine.
1006
Mag Loaded
S
A magazine is present in the
autoloader, and the magazine check
has been carried out.
8005
Media
Removal
Prevented
E O
An eject command has been
attempted after a SCSI PREVENT
MEDIUM REMOVAL command has
been sent by the host.
Action: Try again when the media
removal prevention has been
removed. This can be achieved by
the host sending a SCSI ALLOW
MEDIUM REMOVAL command, or
by resetting or power-cycling the
autoloader.
Front Panel Lights, Autoloader
file:///D|/ADMIN_~1/eng/tape/lights_a.htm (12 of 17) [5/3/2000 3:33:43 PM]