HP SureStore AutoBackup Administrator's Guide - Not Orderable

Ready xxm
S
A cartridge has been loaded in the
DAT drive, and the drive is ready
for tape motion commands. "xxm"
is the length of the currently loaded
cartridge. For example, "Ready
125m" will be displayed when a
DDS-3 (125m) cartridge is loaded.
If a write-protected cartridge is
loaded, the "Ready xxm" message
alternates with the "Read Only"
message.
1013
Rewind
S
The drive is rewinding the tape to
the beginning of the partition.
8020
SCSI Error
E O
A SCSI command error has been
detected.
Action: Check the SCSI interface
connection and try again.
SCSI ID: x
I
This indicates the SCSI ID ("x") of
the autoloader. During the power-on
sequence, it is displayed for 2
seconds.
1012
Search <<
I
The drive is searching for a record,
filemark, setmark, or BOD
(Beginning of Data) towards the
beginning of the tape (in SCSI
terms, it is responding to a SPACE
command with a negative Count
field).
1011
Search >>
I
The drive is searching for a record,
filemark, setmark, or EOD (End of
Data) towards the end of the tape (in
SCSI terms, it is responding to a
SPACE command with a positive
Count field).
1022
Select
Lock
I
Tape Selection is locked (Media
Removal Prevented).
2008
Select
Tape
I
This is displayed when you press the
Select button and for a short time
after the button is released.
0000
Self Test
S
The autoloader is performing its
power-on self-test.
1007
SemiLoaded
S
A cartridge is in the drive but not
loaded (the tape has not been
threaded).
Front Panel Lights, Autoloader
file:///D|/ADMIN_~1/eng/tape/lights_a.htm (14 of 17) [5/3/2000 3:33:43 PM]