HP SureStore AutoBackup Administrator's Guide - Not Orderable

Problem with the fourth stage.
Triangle above hard disk icon doesn't blink.
No Network icon present.
The network icon doesn't blink.
The network icon has a cross through it.
There is a temperature alert.
There is a voltage alert.
Blinking amber Lightbar and LCD message "Capacity Licence Violation".
Blinking amber Lightbar and LCD message "CD-ROM drive not detected".
Blinking amber Lightbar and LCD message "SCSI Interface card Failure".
Blinking amber Lightbar and LCD message "Secondary HDD Failure".
The appliance keeps rebooting itself.
Back to top
Operation
When using the appliance, are there any issues with the application?
Check for these symptoms :
Administrator's console hung but pointer still moving.
Has the Operating System hung ?
Check for these symptoms :
Appliance powered up but admin console cannot be loaded.
Are there any disk errors ?
Check for these symptoms :
The hard disk icon on the LCD has a cross through it. Errors are generated
during use.
Is there a network error ?
Check for these symptoms :
The appliance cannot be found by the clients.
The appliance has stopped serving clients and the network icon on the LCD
displays no activity.
The appliance cannot be accessed over the network.
For further help refer to the network troubleshooting page.
Troubleshooting, Appliance
file:///D|/ADMIN_~1/eng/trouble/trouble1.htm (3 of 11) [5/3/2000 3:34:19 PM]