HP SureStore AutoBackup Administrator's Guide - Not Orderable

Problems with Your Disaster
Recovery CDs
When does the problem occur?
Creating Disaster Recovery CD-ROMs
Using Disaster Recovery CD-ROMs
Creating Disaster Recovery floppies
Using Disaster Recovery floppy's
Creating Disaster Recovery
CD-ROMs
Once it knows what data needs to be recovered, the appliance starts to generate the
disaster recovery CD-ROMs. If not already present, insert writable CD media. The
data is then written to disk. If the option to include all user data was selected, further
disks may be required. A prompt will appear on the administrator's console and on
the LCD display.
Caution: CD re-recordable media can only be read on CD-RW compatible CD
drives.
Exceptions
For protected computers which boot from SCSI CD-ROM drives, disaster
recovery floppy disks must be used first. They must also have their drivers
copied onto the disk. Details of how to do this can be found in the disaster
recovery by floppy disk part of the manual.
For Windows NT or Windows 2000, disaster recovery is not possible on
fault-tolerant disk configurations (created using the software
mirroring/striking built into the operating system).
Troubleshooting,Disaster Recovery CDs
file:///D|/ADMIN_~1/eng/trouble/trouble3.htm (1 of 6) [5/3/2000 3:34:24 PM]