HP SureStore AutoBackup Administrator's Guide - Not Orderable

Verify data on CD7.
Each of these steps generates a screen like the following one for the first step. If
multiple pieces of CD-R media are recorded, the last four screens are generated for
each CD-ROM. Also, if you use CD-RW media, there will be a step to erase the
current contents of the CD-ROM before the disaster recovery data is recorded on the
CD-RW media.
Note: We do not recommend the use of CD-RW media, as it is incompatible with
many types of CD-ROM and DVD-ROM drives.
You will need to insert each piece of CD-R media before the image data can be
recorded. If your recovery data spans multiple pieces of CD-R media, you will be
asked to insert CD-ROMs as needed (after the CD-ROM has been verified and
before the next is prepared).
Note: If multiple pieces of CD-R media are created, label each one (1,2, and so on)
so that the user knows which order to use them in.
Finally, when the process is complete, you will see the following screen indicating
the CD-ROM(s) were successfully created.
Disk Creation
file:///D|/ADMIN_~1/eng/admin/dr_create.htm (5 of 10) [5/3/2000 3:32:35 PM]