HP SureStore AutoBackup Administrator's Guide - Not Orderable

Floppy is as follows:
Create the Disaster Recovery Boot Floppy following the instructions in the
previous section.
1.
Replace the EIDE CD-ROM driver in the config.sys file in the root
directory of the DR boot floppy with the relevant DOS SCSI driver. You need
to replace the line device=oakcdrom.sys /D:mscd001 with the
necessary lines to install the DOS SCSI CD-ROM drivers. For example:
For the Adaptec 2940U/UW controller, the replacement lines would be:
DEVICE=A:\ASPI8DOS.SYS /D
DEVICE=A:\ASPICD.SYS /D:mscd001
For the Symbios SYM53C8XX line of SCSI controllers, the replacement lines
would be: DEVICE=C:[PATH]ASPI8XX.SYS
DEVICE=C:[PATH]SYMCD.SYS /D:mscd001
2.
Microsoft's CD-ROM Extension (MSCDEX.EXE) has already been added to
the DR Boot Floppy and set to execute from the AUTOEXEC.BAT file (the
line LH MSCDEX.EXE /D:mscd001). Note that the device name
mscd001 matches the device name given with the /D switch used when
loading the DOS SCSI drivers above.
3.
A list of DOS SCSI drivers for many Adaptec SCSI controllers can be found below.
All these drivers can be downloaded from the Adaptec web-site URL.
PCI Bus
ASPI8DOS.SYS Adaptec AHA-2910A/2910B
Adaptec AHA-2906
Adaptec AHA-2920C
Adaptec AHA-2930A/2930B/2930C/2930CU
Adaptec AHA-2940/2940AU/2940W/2940U/2940UW
Adaptec AHA-2944W/2944UW
Adaptec AHA-3940/3940U/3940W/3940UW
Adaptec AHA-3940AU/3940AUW
Adaptec AVA-2904, AVA-2902E/I, AVA-2906
Adaptec AIC-7850/7855/7860/7870/7880 based SCSI host
adapters
Adaptec AIC-7895 based SCSI host adapters
ASPI8U2.SYS Adaptec AHA-2930U2
Adaptec AHA-2940U2W
Adaptec AHA-3950U2
AIC-7890/7891/7896/7897 based SCSI host adapters
MCAM18XX.SYS Adaptec AHA-2920/2920A
ISA Bus
Disk Creation
file:///D|/ADMIN_~1/eng/admin/dr_create.htm (9 of 10) [5/3/2000 3:32:35 PM]