HP Business Notebook and Desktop PC F10 setup overview

14
Feature Function Default setting,
if applicable
Reboot
required
SECURITY MENU
Setup Password Establishes a setup password with administrator privileges No
Power-on Password Establishes a power-on password with user privileges No
Password Options Available when you are configuring a setup or power-on password Yes

Lock Legacy Resources
Limits ACPI control of legacy COM and LPT ports Disabled Yes

Setup Browse Mode
Gives non-admin limited access to BIOS setup Enabled Yes

Password Prompt on F9, F11 &
F12
Requires admin password for BIOS hotkeys Enabled Yes

Network Server Mode
Enables network server mode, allowing the system to bypass the
power-on password
Disabled Yes

Stringent Password
Prevents the passwords from being cleared Disabled Yes
Smart Cover If options are present, allows chassis cover features to be set Yes
Cover Lock Engages cover lock solenoid Unlock Yes
Cover Removal Sensor Sets system policy in response to cover removal (Notify User, Setup
Password)
Disabled Yes
Device Security Yes
 Embedded Security Device
Sets embedded device security availability to the OS. Device available Yes
 System Audio
Sets system audio availability Device available Yes
 Network Controller
Sets network controller availability Device available Yes
 SATA0
Sets SATA0 availability Device available Yes
 SATA1
Sets SATA1 availability Device available Yes
 SATA2
Sets SATA2 availability (on some tower systems Device available Yes
 SATA3
Sets SATA3 availability Device available Yes
 SATA5
Sets SATA5 availability Device available Yes
USB Security Note: Dependent upon chassis type: Yes

Front USB Ports
Yes
– USB3 Port 1 Sets USB port status Enabled Yes
– USB3 Port 2 Sets USB port status Enabled Yes
– USB Port 1 Sets USB port status Enabled Yes
– USB Port 2 Sets USB port status Enabled Yes

Rear USB Ports
Yes
– USB3 Port 1 Sets USB port status Enabled Yes
– USB3 Port 2 Sets USB port status Enabled Yes
– USB Port 1 Sets USB port status Enabled Yes
– USB Port 2 Sets USB port status Enabled Yes
– USB Port 3 Sets USB port status Enabled Yes
– USB Port 4 Sets USB port status Enabled Yes