HP Jetdirect 2700w USB Print Server - Setup Guide
Table Of Contents
- Introduction
- Specifications
- Supported HP software solutions
- Troubleshooting
- Regulatory statements
- Regulatory model identification numbers
- European Union & United Kingdom Regulatory Notice
- FCC regulations
- Canada - Industry Canada ICES-003 Compliance Statement
- Wireless statements
- FCC compliance statement—United States
- Notice to users in Argentina
- Brazil: (Português)
- Canadian statements
- Exposure to Radio Frequency Radiation (Canada)
- China CMIIT Wireless Statement
- European Regulatory Notice
- Notice to users in Indonesia
- Notice to users in Korea
- Mexico statement
- Notice to users in Singapore
- Notice to users in South Africa
- Notice to users in the Ukraine
- RFID/NFC Statement
- Environmental product stewardship program
- Service and support
- Glossary for Network printing terms and concepts
- Glossary for Wireless LAN terms and concepts
- Index
Specications2
Review the technical specications for the product.
NOTE: The following specications are correct at the time of publication, but they are subject to change. For
current information, see http://www.hp.com/support/jd2700w.
Electrical specications
Electrical power is supplied by the printer's rear USB host port.
Power requirements are based on the country/region where the product is sold. Do not convert operating
voltages. This will damage the product and void the product warranty.
Table 2-1 Power requirements
Product Current and voltage
HP Jetdirect 2700w USB Wireless Print Server 500ma maximum @ 5.0 V nominal DC
● Maximum output current: 500mA
● Voltage: 5.0 V nominal DC
Network (for print server setup)
View the network specication for the product.
● HP Jetdirect 2700w USB Wireless Print Server : USB 2.0 compliant connector.
● Networking connectivity technology: Wireless
Supported network protocols
The supported network protocols, and popular network printing environments that use those protocols, are
listed in the following table.
Table 2-2
Supported network protocols
Supported network protocols Typical network printing environments
NOTE: Refer to the current HP Jetdirect product data sheets for
additional network systems and versions. For operation with other
network environments, consult your system vendor or authorized
HP dealer.
TCP/IPv4 ● (Direct Mode printing) Microsoft Windows Server 2003 (32-
and 64-bit), Windows Server 2008 (32- and 64-bit), Windows
7 (32- and 64-bit), Windows Vista (32- and 64-bit), and
Windows XP (32- and 64-bit).
10 Chapter 2 Specications