User's Manual

Step ve: Set up Send to Email to use Oce 365 Outlook (optional)
Introduction
Microsoft Oce 365 Outlook is a cloud-based email system provided by Microsoft which uses Microsoft's Simple
Mail Transfer Protocol (SMTP) server to send or receive emails. Complete the following to enable the printer to
send an email with an Oce 365 Outlook account from the control panel.
NOTE: You must have an email address account with Oce 365 Outlook to congure the settings in the EWS.
Congure the outgoing email server (SMTP) to send an email from an Oce 365 Outlook account
1. Using the EWS top navigation tabs, click Networking.
2. In the left navigation pane, click TCP/IP Settings.
3. In the TCP/IP Settings area, click the Network Identication tab.
4. If DNS is required on the network, in the TCP/IP Domain Sux area, verify that the DNS sux for the email
client being used is listed. DNS suxes have this format: companyname.com, Gmail.com, etc.
NOTE: If the Domain Name sux is not set up, use the IP address.
5
. Click Apply.
6. Click the Scan/Digital Send
tab.
7
. On the left navigation pane, click Email Setup.
ENWW Set up Scan to Email 97