User's Manual

2. Open the scanner lid.

. Clean the scanner glass and the document feeder

strips with a soft cloth or sponge that has been

moistened with nonabrasive glass cleaner.

CAUTION: Do not use abrasives, acetone,

benzene, ammonia, ethyl alc

ohol, or carbon

tetrachloride on any part of the printer; these can

damage the printer. Do not place liquids directly on

the glass or platen. They might seep and damage

the printer.

NOTE: If you are having trouble with streaks on

opies when you are using the document feeder,

be sure to clean the small strip of glass on the left

side of the scanner.

. Dry the glass and white plastic parts with a

chamois or a cellulose sponge to prevent spotting.

. Connect the power cable to an outlet, and then

press the power button to turn the printer on.

Calibrate the scanner

If the copied image is not positioned correctly on the page, follow these steps to calibrate the scanner.

NOTE: When using the document feeder, make sure to adjust the guides in the input tray so they are against

the origin

al document.

. From the Home screen on the printer control panel, swipe until the Support Tools menu displays. Touch the

Support Tools icon to open the menu.

. Open the following menus:

ENWW Improve copy image quality 225