HP EliteBook Folio 1040 G1 Notebook PC Maintenance and Service Guide
Keyboard
Description Spare part number
Keyboard
NOTE: For a detailed list of available keyboards, see
Sequential part number listing on page 24.
739563-xx1
Before removing the keyboard, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
Bottom cover on page 39).
5. Remove the battery (see
Battery on page 44).
6. Remove the memory module (see
Memory module on page 47).
Remove the keyboard:
1. Loosen the 2 captive Phillips screws that secure the keyboard to the computer.
2. Release and disconnect the following connectors and cables:
●
Release the keyboard connector (1) and remove the cable (2).
●
Release the backlight connector (3) and remove the cable (4).
Component replacement procedures 53