HP EliteBook Folio 1040 G1 Notebook PC Maintenance and Service Guide
Speaker assembly
Description Spare part number
Speaker assembly (includes cable) 739577-001
Before removing the speaker assembly, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
Bottom cover on page 39)
5. Remove the battery (see
Battery on page 44).
6. Remove the keyboard (see
Keyboard on page 53)
7. Remove the heat sink/fan assembly (see
Heat sink/fan assembly on page 62)
8. Remove the system board (see
System board on page 64)
Remove the speaker assembly:
1. Use a tool to pry the speaker and disengage the adhesive that secures it to the computer (1).
2. Remove the speaker (2) from the computer.
Reverse this procedure to install the speakers.
70 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts