Datasheet

4
HP E2610 Switch Series
Specifications
HP E2610-48 Switch (J9088A) HP E2610-24 Switch (J9085A) HP E2610-24-PoE Switch (J9087A)
Ports
48 autosensing 10/100 ports (IEEE 802.3 Type
10BASE-T, IEEE 802.3u Type 100BASE-TX); Media
Type: Auto-MDIX; Duplex: half or full
1 RJ-45 serial console port
2 autosensing 10/100/1000 ports (IEEE 802.3
Type 10BASE-T, IEEE 802.3u Type 100BASE-TX,
IEEE 802.3ab Type 1000BASE-T); Duplex:
10BASE-T/100BASE-TX: half or full; 1000BASE-T:
full only
2 open mini-GBIC (SFP) slots
24 autosensing 10/100 ports (IEEE 802.3 Type
10BASE-T, IEEE 802.3u Type 100BASE-TX); Media
Type: Auto-MDIX; Duplex: half or full
1 RJ-45 serial console port
2 autosensing 10/100/1000 ports (IEEE 802.3
Type 10BASE-T, IEEE 802.3u Type 100BASE-TX,
IEEE 802.3ab Type 1000BASE-T); Duplex:
10BASE-T/100BASE-TX: half or full; 1000BASE-T:
full only
2 open mini-GBIC (SFP) slots
24 autosensing 10/100 ports (IEEE 802.3 Type
10BASE-T, IEEE 802.3u Type 100BASE-TX); Media
Type: Auto-MDIX; Duplex: half or full
1 RJ-45 serial console port
2 autosensing 10/100/1000 ports (IEEE 802.3
Type 10BASE-T, IEEE 802.3u Type 100BASE-TX,
IEEE 802.3ab Type 1000BASE-T); Duplex:
10BASE-T/100BASE-TX: half or full; 1000BASE-T:
full only
2 open mini-GBIC (SFP) slots
Physical characteristics
Dimensions
9.3(d) x 17.4(w) x 1.73(h) in. (23.62 x 44.2 x
4.39 cm) (1U height)
9.3(d) x 17.4(w) x 1.73(h) in. (23.62 x 44.2 x
4.39 cm) (1U height)
12.5(d) x 17.4(w) x 1.73(h) in. (31.75 x 44.2 x
4.39 cm) (1U height)
Weight
10.75 lb. (4.88 kg), Fully loaded 2.49 lb. (1.13 kg), Fully loaded 15.05 lb. (6.83 kg), Fully loaded
Memory and processor
Processor
MIPS @ 300 MHz, 16 MB flash, 128 MB SDRAM;
packet buffer size: 2 MB
MIPS @ 300 MHz, 16 MB flash, 128 MB SDRAM;
packet buffer size: 1 MB
MIPS @ 300 MHz, 16 MB flash, 128 MB SDRAM;
packet buffer size: 1 MB
Mounting
Mounts in an EIA-standard 19 in. telco rack or
equipment cabinet (hardware included); horizontal
surface mounting only
Mounts in an EIA-standard 19 in. telco rack or
equipment cabinet (hardware included); horizontal
surface mounting only
Mounts in an EIA-standard 19 in. telco rack or
equipment cabinet (hardware included); horizontal
surface mounting only
Performance
100 Mb Latency
< 6.2 µs (LIFO) < 4.1 µs (LIFO) < 4.1 µs (LIFO)
1000 Mb Latency
< 4.4 µs (LIFO) < 2.9 µs (LIFO) < 2.9 µs (LIFO)
Throughput
up to 13.0 million pps up to 9.5 million pps up to 9.5 million pps
Routing/Switching capacity
17.6 Gbps 12.8 Gbps 12.8 Gbps
MAC address table size
8000 entries 8000 entries 8000 entries
Environment
Operating temperature
32°F to 122°F (0°C to 50°C) 32°F to 122°F (0°C to 50°C) 32°F to 122°F (0°C to 50°C)
Operating relative humidity
15% to 95% @ 104°F (40°C), noncondensing 15% to 95% @ 104°F (40°C), noncondensing 15% to 95% @ 104°F (40°C), noncondensing
Nonoperating/Storage temperature
-40°F to 158°F (-40°C to 70°C) -40°F to 158°F (-40°C to 70°C) -40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage relative humidity
15% to 90% @ 149°F (65°C), noncondensing 15% to 90% @ 149°F (65°C), noncondensing 15% to 90% @ 149°F (65°C), noncondensing
Altitude
up to 10,000 ft. (3 km) up to 10,000 ft. (3 km) up to 10,000 ft. (3 km)
Acoustic
Power: 45 dB, Pressure: 36.2 dB; DIN 45635T.19
per ISO 7779
Power: 0 dB, Pressure: 0 dB No Fan Power: 64 dB, Pressure: 57 dB; DIN 45635T.19
per ISO 7779
Electrical characteristics
Achieved Miercom Certified Green Award
Maximum heat dissipation
285 BTU/hr (300.67 kJ/hr) 142 BTU/hr (149.81 kJ/hr) 410 BTU/hr (432.55 kJ/hr), (switch-only BTU/hr:
410; combined switch + max. PoE devices at 15.4
W: 2281 BTU/hr )
Voltage
100-127/200-240 VAC 100-127/200-240 VAC 100-127/200-240 VAC
Current
1.3/0.8 A 0.8/0.4 A 7.0/3.5 A
Maximum power rating
66 W 41 W 77 W
PoE power
406 W
Frequency
50/60 Hz 50/60 Hz 50/60 Hz
Notes
Maximum power rating and maximum heat
dissipation are the worst-case theoretical maximum
numbers provided for planning the infrastructure
with fully loaded PoE (if equipped), 100% traffic, all
ports plugged in, and all modules populated.
Maximum power rating and maximum heat
dissipation are the worst-case theoretical maximum
numbers provided for planning the infrastructure
with fully loaded PoE (if equipped), 100% traffic, all
ports plugged in, and all modules populated.
Maximum power rating and maximum heat
dissipation are the worst-case theoretical maximum
numbers provided for planning the infrastructure
with fully loaded PoE (if equipped), 100% traffic, all
ports plugged in, and all modules populated.
PoE power is the power supplied by the internal
power supply. It is dependent on the type and
quantity of power supplies and may be
supplemented with the use of an external power
supply (EPS).
Power consumption: 77 W without PoE; 527 W
with PoE.
Safety
CSA 22.2 No. 60950; UL 60950; IEC 60950; EN
60950
CSA 22.2 No. 60950; UL 60950; IEC 60950; EN
60950
CSA 22.2 No. 60950; UL 60950; IEC 60950; EN
60950
Emissions
FCC Class A; VCCI Class A; EN 55022/CISPR 22
Class A
FCC Class A; VCCI Class A; EN 55022/CISPR 22
Class A
FCC Class A; VCCI Class A; EN 55022/CISPR 22
Class A
Immunity
EN
EN 55024, CISPR 24 EN 55024, CISPR 24 EN 55024, CISPR 24