Datasheet

8
HP E2610 Switch Series
Specifications (continued)
HP E2610-48-PoE Switch (J9089A) HP E2610-24-PPoE Switch (J9086A)
Ports
48 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX); Media Type: Auto-MDIX; Duplex: half or full
1 RJ-45 serial console port
2 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u
Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex:
10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
2 open mini-GBIC (SFP) slots
24 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX); Media Type: Auto-MDIX; Duplex: half or full
1 RJ-45 serial console port
2 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u
Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex:
10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
2 open mini-GBIC (SFP) slots
Physical characteristics
Dimensions
13.5(d) x 17.4(w) x 1.73(h) in. (34.29 x 44.2 x 4.39 cm) (1U height) 9.3(d) x 17.4(w) x 1.73(h) in. (23.62 x 44.2 x 4.39 cm) (1U height)
Weight
16.7 lb. (7.58 kg), Fully loaded 7.5 lb. (3.4 kg)
Memory and processor
Processor
MIPS @ 300 MHz, 16 MB flash, 128 MB SDRAM; packet buffer size: 2 MB MIPS @ 300 MHz, 16 MB flash, 128 MB SDRAM; packet buffer size: 1 MB
Mounting
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware
included); horizontal surface mounting only
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware
included); horizontal surface mounting only
Performance
100 Mb Latency
< 6.2 µs (LIFO) < 4.1 µs
1000 Mb Latency
< 4.4 µs (LIFO) < 2.9 µs
Throughput
up to 13.0 million pps up to 9.5 million pps
Routing/Switching capacity
17.6 Gbps 12.8 Gbps
MAC address table size
8000 entries 8000 entries
Environment
Operating temperature
32°F to 122°F (0°C to 50°C) 32°F to 122°F (0°C to 50°C)
Operating relative humidity
15% to 95% @ 104°F (40°C), noncondensing 15% to 95% @ 104°F (40°C), noncondensing
Nonoperating/Storage temperature
-40°F to 158°F (-40°C to 70°C) -40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage relative humidity
15% to 90% @ 149°F (65°C), noncondensing 15% to 90% @ 149°F (65°C), noncondensing
Altitude
up to 10,000 ft. (3 km) up to 10,000 ft. (3 km)
Acoustic
Power: 63.6 dB, Pressure: 56.6 dB; DIN 45635T.19 per ISO 7779 Power: 46 dB, Pressure: 38.4 dB; DIN 45635T.19 per ISO 7779
Electrical characteristics
Maximum heat dissipation
410 BTU/hr (432.55 kJ/hr), (switch-only BTU/hr: 410; combined switch + max.
PoE devices at 15.4 W: 2281 BTU/hr)
181 BTU/hr (190.96 kJ/hr), (switch-only BTU/hr: 181; combined switch + max.
PoE devices at 15.4 W: 827 BTU/hr)
Voltage
100-127/200-240 VAC 100-127/200-240 VAC
Current
7.0/3.5 A 2.5/1.3 A
Maximum power rating
96 W 62 W
PoE power
406 W 126 W
Frequency
50/60 Hz 50/60 Hz
Notes
Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure with fully
loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules
populated.
PoE power is the power supplied by the internal power supply. It is dependent
on the type and quantity of power supplies and may be supplemented with the
use of an external power supply (EPS).
Power consumption: 96 W without PoE; 590 W with PoE.
Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure with fully
loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules
populated.
PoE power is the power supplied by the internal power supply. It is dependent
on the type and quantity of power supplies and may be supplemented with the
use of an external power supply (EPS).
Power consumption: 62 W without PoE; 189 W with PoE.
Safety
CSA 22.2 No. 60950; UL 60950; IEC 60950; EN 60950 CSA 22.2 No. 60950; UL 60950; IEC 60950; EN 60950
Emissions
FCC Class A; VCCI Class A; EN 55022/CISPR 22 Class A FCC Class A; VCCI Class A; EN 55022/CISPR 22 Class A
Immunity
EN
EN 55024, CISPR 24 EN 55024, CISPR 24
ESD
IEC 61000-4-2; 4 kV CD, 8 kV AD IEC 61000-4-2; 4 kV CD, 8 kV AD
Radiated
IEC 61000-4-3; 3V/m IEC 61000-4-3; 3V/m
EFT/Burst
IEC 61000-4-4; 1.0 kV (power line), 0.5kV (signal line) IEC 61000-4-4; 1.0 kV (power line), 0.5kV (signal line)
Surge
IEC 61000-4-5; 1 kV/2 kV AC IEC 61000-4-5; 1 kV/2 kV AC
Conducted
IEC 61000-4-6; 3V IEC 61000-4-6; 3V
Power frequency magnetic field
IEC 61000-4-8; 1A/m,50 or 60 Hz IEC 61000-4-8; 1A/m,50 or 60 Hz
Voltage dips and interruptions
IEC 61000-4-11; >95% reduction, 0.5 period; 30% reduction, 25 periods IEC 61000-4-11; >95% reduction, 0.5 period; 30% reduction, 25 periods
Harmonics
EN 61000-3-2, IEC 61000-3-2 EN 61000-3-2, IEC 61000-3-2
Flicker
EN 61000-3-3, IEC 61000-3-3 EN 61000-3-3, IEC 61000-3-3
Management
HP PCM+; HP PCM (included); command-line interface; Web browser;
configuration menu; out-of-band management (serial RS-232C)
HP PCM+; HP PCM (included); command-line interface; Web browser;
configuration menu; out-of-band management (serial RS-232C)