Product Data Sheet / Brochure
PDU CABLE ROW
#B2C
C15 PDU Jumper Cord (ROW)
High Volt Switch to Wall Power Cord
#B2E
NEMA L6-20P Cord (NA/MEX/JP/TW)
Note 1
The following Transceivers install into this Chassis : (Use #0D1 or #B01 quoted
to switch if switch is CTO) - if applicable
HP X121 1G SFP LC SX Transceiver
J4858C
HP X121 1G SFP LC LX Transceiver
J4859C
HP X121 1G SFP LC LH Transceiver
J4860C
HP X121 1G SFP RJ45 T Transceiver
J8177C
HP X122 1G SFP LC BX-D Transceiver
J9142B
HP X122 1G SFP LC BX-U Transceiver
J9143B
HP X132 10G SFP+ LC ER Transceiver
J9153A
HP X132 10G SFP+ LC LR Transceiver
J9151A
HP X132 10G SFP+ LC LRM Transceiver
J9152A
HP X132 10G SFP+ LC SR Transceiver
J9150A
HP X242 SFP+ SFP+ 1m Direct Attach Cable
J9281B
HP X242 SFP+ SFP+ 3m Direct Attach Cable
J9283B
HP X242 SFP+ SFP+ 7m Direct Attach Cable
J9285B
HP X244 XFP SFP+ 1m Direct Attach Cable
J9300A
HP X244 XFP SFP+ 3m Direct Attach Cable
J9301A
HP X244 XFP SFP+ 5m Direct Attach Cable
J9302A
HP X242 10G SFP+ 10m DAC Cable
J9286B
HP X242 10G SFP+ 15m DAC Cable
J9287B
Note 2
Localization required (See Localization Menu)
Note 5
If #B2E is selected Then replace Localized option with #B2E for power supply and with #B2E for switch . (Offered
only in North America, Mexico Taiwan, and Japan)
Note 8
If this Switch is selected, Then a Minimum of 1 factory integrated accessory must be ordered and integrated to CTO
chassis. See Menu below, option must have a #0D1 to be integrated to the CTO Chassis.
Note 9
If the Switch Chassis is to be Box Level Factory Integrated (CTO), Then the #0D1 is required on the Switch Chassis
and integrated to the J9849A - HP 82xx CTO Enablement. (Min 1/Max 1 Switch per SSP)
Rack Level Integration CTO Models
HP 8206 zl Switch w/Premium Software - CTO
J9640A
1 Power Supply required
1 - J9092A - HP E8200 zl Management Module Included
2 - J9093A - HP E8200 zl Fabric Module Included
1 - J9095A - HP E8200 zl System Support Module Included
6U - Height
HP 8206-44G-PoE+-2XG v2 zl Swch w Pm SW - CTO
J9638A
44 RJ-45 autosensing 10/100/1000 PoE+ ports
1 - J9306A - HP 1500 W PoE+ zl Power Supply Included
1 - J9092A - HP E8200 zl Management Module Included
See Configuration
Note:1, 9
QuickSpecs
HP 8200 zl Switch Series
Configuration
DA - 12862 Worldwide — Version 38 — February 17, 2014
Page 15