QuickSpecs HP 2920 Switch Series Overview Models HP 2920-24G Switch HP 2920-24G-PoE+ Switch HP 2920-48G Switch HP 2920-48G-PoE+ Switch HP 2920-48G-PoE+ 740W Switch 1. 2. 3. 4. 5. 6. 1. 2. 3. 4. J9726A J9727A J9728A J9729A J9836A HP 2920-24G Switch 7. PoE, Tmp (Temperature), Test, Fan, and Aux (Auxiliary) port status LED Console ports 8. Reset and Clear buttons LED Mode button and indicator LEDs 9. Aux port and Out-of-Band Management port Status LEDs for components on the back of the switch 10.
QuickSpecs HP 2920 Switch Series Overview 5. 6. 1. 2. 3. 4. 5. 6. 1. 2. 3. 4. 5. 6. Stacking status LEDs Switch port LEDs 11. Dual-Personality (10/100/1000BASE-T or SFP) ports HP 2920-48G Switch Power, Fault, and Locator LEDs 7. PoE, Tmp (Temperature), Test, Fan, and Aux (Auxiliary) port status LED Console ports 8. Reset and Clear buttons LED Mode button and indicator LEDs 9. Aux port and Out-of-Band Management port Status LEDs for components on the back of the switch 10.
QuickSpecs HP 2920 Switch Series Overview 1. 2. 3. Grounding lug mounting hole 10G Expansion Module slots Stacking Module Slot HP 2920 Switch Series Rear (All) 4. XPS Connector 5. Power Supply and AC power connector Product overview The HP 2920 Switch Series consists of five switches: the HP 2920-24G and 2920-24G-PoE+ Switches with 24 10/100/1000 ports, and the HP 2920-48G and 2920-48G-PoE+ and 2920-48G 740W PoE+ Switches with 48 10/100/1000 ports.
QuickSpecs HP 2920 Switch Series Overview Large buffers provide graceful congestion management Connectivity Flexible 10 Gbps Ethernet connectivity up to four optional 10-Gigabit ports (SFP+ and/or 10GBASE-T) Two-port stacking module with up to 40 Gbps/port optional two-port stacking module allows stacking of up to four switch units into a single virtual device Auto-MDIX automatically adjusts for straight-through or crossover cables on all 10/100 and 10/100/1000 ports IPv6 IPv6 host allows the switches to
QuickSpecs HP 2920 Switch Series Overview LLDP-MED (Media Endpoint Discovery) defines a standard extension of LLDP that stores values for parameters such as QoS and VLAN to automatically configure network devices such as IP phones IEEE 802.1AB Link Layer Discovery Protocol (LLDP) is an automated device discovery protocol that provides easy mapping of network management applications PoE and PoE+ allocations support multiple methods (automatic, IEEE 802.3at dynamic, LLDP-MED fine grain, IEEE 802.
QuickSpecs HP 2920 Switch Series Overview the two devices. Layer 2 switching VLAN support and tagging supports IEEE 802.1Q (4,094 VLAN IDs) and 256 VLANs simultaneously GARP VLAN Registration Protocol allows automatic learning and dynamic assignment of VLANs Jumbo packet support improves the performance of large data transfers; supports frame size of up to 9220 bytes IEEE 802.
QuickSpecs HP 2920 Switch Series Overview encrypts all transmitted data for secure remote CLI access over IP networks Secure Sockets Layer (SSL) encrypts all HTTP traffic, allowing secure access to the browser-based management GUI in the switch Port security allows access only to specified MAC addresses, which can be learned or specified by the administrator MAC address lockout prevents particular configured MAC addresses from connecting to the network Secure FTP allows secure file transfer to and from th
QuickSpecs HP 2920 Switch Series Overview and HP Survivable Branch Communication zl Module powered by Microsoft® Lync has a five-year hardware warranty. For details, refer to the Software license and hardware warranty statements at www.hp.com/networking/warranty.
QuickSpecs HP 2920 Switch Series Configuration Build To Order: BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or Rack-Shippable solution.
QuickSpecs HP 2920 Switch Series Configuration PDU CABLE ROW C15 PDU Jumper Cord (ROW) J9728A#B2C High Volt Switch to Wall Power Cord NEMA L6-20P Cord (NA/MEX/JP/TW) J9728A#B2E HP 2920-48G-POE+ Switch 48 RJ-45 autosensing 10/100/1000 PoE+ ports 4 dual-personality ports min=0 \ max=4 SFP Transceivers 1 - HP X332 575W 100-240VAC to 54VDC PS included 1U - Height J9729A See Configuration Note:1, 2 PDU CABLE NA/MEX/TW/JP C15 PDU Jumper Cord (NA/MEX/TW/JP) J9729A#B2B PDU CABLE ROW C15 PDU Jumper Cord (R
QuickSpecs HP 2920 Switch Series Configuration HP X121 1G SFP RJ45 T Transceiver HP X111 100M SFP LC FX Transceiver HP X112 100M SFP LC BX-D Transceiver HP X112 100M SFP LC BX-U Transceiver Note 2 J8177C J9054C J9099B J9100B Localization required on orders without #B2B, #B2C or #B2E options.
QuickSpecs HP 2920 Switch Series Configuration C15 PDU Jumper Cord (ROW) HP 2920-48G-POE+ Switch 48 RJ-45 autosensing 10/100/1000 PoE+ ports 4 dual-personality ports min=0 \ max=4 SFP Transceivers 1 - HP X332 575W 100-240VAC to 54VDC PS included 1U - Height J9729A#0D1 See Configuration Note:1, 3, 4, 5 PDU CABLE NA/MEX/TW/JP C15 PDU Jumper Cord (NA/MEX/TW/JP) J9729A#B2B PDU CABLE ROW C15 PDU Jumper Cord (ROW) J9729A#B2C HP 2920-48G-POE+ 740W Switch 44 RJ-45 autosensing 10/100/1000 PoE+ ports 4 RJ-45
QuickSpecs HP 2920 Switch Series Configuration Note 5 If HP CTO Switch Chassis is selected for Rack Level Integration, Then the CTO Switch Chassis needs to integrate (with #0D1) to the HP Rack. Remarks Drop down under power supply should offer the following options and results: Switch/Router/Power Supply to PDU Power Cord - #B2B in North America, Mexico, Taiwan, and Japan or #B2C ROW.
QuickSpecs HP 2920 Switch Series Configuration PDU CABLE NA/MEX/TW/JP C15 PDU Jumper Cord (NA/MEX/TW/JP) J9737A#B2B PDU CABLE ROW C15 PDU Jumper Cord (ROW) J9737A#B2C High Volt Switch to Wall Power Cord NEMA L6-20P Cord (NA/MEX/JP/TW) J9737A#B2E Configuration Rules Note 1 This power supply is only supported on the J9726A and J9728A. Note 2 This power supply is only supported on the J9727A ,J9729A and J9836A. Note 3 Localization required on orders without #B2B ,#B2C or #B2E options.
QuickSpecs HP 2920 Switch Series Configuration X332 575W 100-240VAC to 54VDC PS, UK - United Kingdom - English localization Power Cord: Quantity :1, BS 1363/A, C13 STRAIGHT, 250 V, 10 A, 2.3 meters, 7.55 feet ,Part Store #: 8120-6809 X332 575W 100-240VAC to 54VDC PS, SZ - Switzerland - English localization Power Cord: Quantity :1, SEV 6534-2 Type 12, C13 STRAIGHT, 250 V, 10 A, 2.25 meters, 7.
QuickSpecs HP 2920 Switch Series Configuration Power Cord: Quantity :1, NBR 14136 Fig13, C13 STRAIGHT, 250 V, 2.5 A, 2.5 meters, 8.21 feet ,Part Store #: 8121-1069 X331 165W 100-240VAC to 12VDC PS, KR - Korea - English localization Power Cord: Quantity :1, CEE 7-VII, C13 STRAIGHT, 250 V, 10 A, 2.25 meters, 7.39 feet ,Part Store #: 8120-6811 X331 165W 100-240VAC to 12VDC PS, UK - United Kingdom - English localization Power Cord: Quantity :1, BS 1363/A, C13 STRAIGHT, 250 V, 10 A, 2.3 meters, 7.
QuickSpecs HP 2920 Switch Series Configuration 2920-24G Switch, EU - Europe - English localization Power Cord: Quantity :1, CEE 7-VII, C13 STRAIGHT, 250 V, 10 A, 2.25 meters, 7.39 feet ,Part Store #: 8120-6811 2920-24G Switch, AU - Australia - English localization Power Cord: Quantity :1, AS/NZS 3112, C13 STRAIGHT, 250 V, 10 A, 2.3 meters, 7.55 feet ,Part Store #: 8121-0834 2920-24G Switch, BR - Brazil - Portuguese localization Power Cord: Quantity :1, NBR 14136 Fig13, C13 STRAIGHT, 250 V, 2.5 A, 2.
QuickSpecs HP 2920 Switch Series Configuration Power Cord: Quantity :1, IRAM 2073, C13 STRAIGHT, 250 V, 10 A, 2.3 meters, 7.55 feet ,Part Store #: 8120-6869 2920-24G Switch, JmpCbl-NA/JP/TW - JmpCbl-NA/JP/TW Power Cord: Quantity :1, C14 STRAIGHT, C15 STRAIGHT, 250 V, 10 A, 2.5 meters, 8.21 feet ,Part Store #: 8121-1091 2920-24G Switch, JmpCbl-ROW - JmpCbl-ROW Power Cord: Quantity :1, C14 STRAIGHT, C15 STRAIGHT, 250 V, 10 A, 2.5 meters, 8.
QuickSpecs HP 2920 Switch Series Configuration Power Cord: Quantity :1, SI 32 90-DEG, C13 STRAIGHT, 250 V, 10 A, 2.5 meters, 8.21 feet ,Part Store #: 8121-1035 2920-24G-POE+ Switch, TH - Thailand - English localization Power Cord: Quantity :1, NEMA 5-15P, C13 STRAIGHT, 250 V, 10 A, 2.3 meters, 7.55 feet ,Part Store #: 8121-0668 2920-24G-POE+ Switch, CN - China - English localization Power Cord: Quantity :1, GB 1002, C13 STRAIGHT, 250 V, 10 A, 2.3 meters, 7.
QuickSpecs HP 2920 Switch Series Configuration 2920-48G Switch, SZ - Switzerland - English localization Power Cord: Quantity :1, SEV 6534-2 Type 12, C13 STRAIGHT, 250 V, 10 A, 2.25 meters, 7.39 feet ,Part Store #: 8120-6815 2920-48G Switch, DK - Denmark - English localization Power Cord: Quantity :1, DK 2-5A, C13 STRAIGHT, 250 V, 10 A, 2.25 meters, 7.39 feet ,Part Store #: 8120-6814 2920-48G Switch, JP - Japan - English localization Power Cord: Quantity :1, JIS C 8303, C13 STRAIGHT, 125 V, 12 A, 2.
QuickSpecs HP 2920 Switch Series Configuration Power Cord: Quantity :1, NEMA 5-15P, C15 STRAIGHT, 125 V, 15 A, 2.5 meters, 8.21 feet ,Part Store #: 8121-0914 2920-48G-POE+ Switch, EU - Europe - English localization Power Cord: Quantity :1, CEE 7-VII, C13 STRAIGHT, 250 V, 10 A, 2.25 meters, 7.39 feet ,Part Store #: 8120-6811 2920-48G-POE+ Switch, AU - Australia - English localization Power Cord: Quantity :1, AS/NZS 3112, C13 STRAIGHT, 250 V, 10 A, 2.3 meters, 7.
QuickSpecs HP 2920 Switch Series Configuration Power Cord: Quantity :1, IRAM 2073, C13 STRAIGHT, 250 V, 10 A, 2.3 meters, 7.55 feet ,Part Store #: 8120-6869 2920-48G-POE+ Switch, JmpCbl-NA/JP/TW - JmpCbl-NA/JP/TW Power Cord: Quantity :1, C14 STRAIGHT, C15 STRAIGHT, 250 V, 10 A, 2.5 meters, 8.21 feet ,Part Store #: 8121-1091 2920-48G-POE+ Switch, JmpCbl-ROW - JmpCbl-ROW Power Cord: Quantity :1, C14 STRAIGHT, C15 STRAIGHT, 250 V, 10 A, 2.5 meters, 8.
QuickSpecs HP 2920 Switch Series Configuration HP X242 10G SFP+ to SFP+ 10m Direct Attach Copper Cable HP X242 10G SFP+ to SFP+ 15m Direct Attach Copper Cable J9286B J9287B Stacking Modules System (std 0 // max 1) User Selection (min 0 // max 1) per enclosure HP 2920 2-port Stacking Module J9733A Transceivers SFP Transceivers HP X121 1G SFP LC LH Transceiver HP X121 1G SFP LC LX Transceiver HP X121 1G SFP LC SX Transceiver HP X122 1G SFP LC BX-D Transceiver HP X122 1G SFP LC BX-U Transceiver HP X121 1
QuickSpecs HP 2920 Switch Series Configuration HP 2 m Multimode OM3 LC/LC FC Cable HP 5 m Multimode OM3 LC/LC FC Cable HP 15 m Multimode OM3 LC/LC FC Cable HP 30 m Multimode OM3 LC/LC FC Cable HP 50 m Multimode OM3 LC/LC FC Cable HP Premier Flex LC/LC OM4 2f 1m Cbl HP Premier Flex LC/LC OM4 2f 2m Cbl HP Premier Flex LC/LC OM4 2f 5m Cbl HP Premier Flex LC/LC OM4 2f 15m Cbl HP Premier Flex LC/LC OM4 2f 30m Cbl HP Premier Flex LC/LC OM4 2f 50m Cbl AJ835A AJ836A AJ837A AJ838A AJ839A QK732A QK733A QK734A QK73
QuickSpecs HP 2920 Switch Series Configuration High Volt Switch to Wall Power Cord NEMA L6-20P Cord (NA/MEX/JP/TW) HP X332 575W 100-240VAC to 54VDC PS includes 1 x c15, 575w J9739A#B2E J9738A See Configuration Note:2 PDU CABLE NA/MEX/TW/JP C15 PDU Jumper Cord (NA/MEX/TW/JP) J9738A#B2B PDU CABLE ROW C15 PDU Jumper Cord (ROW) J9738A#B2C High Volt Switch to Wall Power Cord NEMA L6-20P Cord (NA/MEX/JP/TW) J9738A#B2E HP X332 1050W 100-240VAC to 54VDC PS includes 1 x c15, 1050w J9737A See Configuratio
QuickSpecs HP 2920 Switch Series Configuration Remarks: For J9726A, and J9728A, the power supply in J9805A must be J9739A (165W). For J9727A and J9729A, the power supply in J9805A must be J9737A (1050W) or J9738A (575W). For J9836A, the power supply in J9805A must be J9737A (1050W). Drop down under power supply should offer the following options and results: Switch/Router/Power Supply to PDU Power Cord - #B2B in North America, Mexico, Taiwan, and Japan or #B2C ROW.
QuickSpecs HP 2920 Switch Series Technical Specifications HP 2920-24G Switch (J9726A) I/O ports and slots Power supplies Physical characteristics 20 RJ-45 autosensing 10/100/1000 ports; Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T) 4 RJ-45 dual-personality 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.
QuickSpecs HP 2920 Switch Series Technical Specifications Safety Emissions CE Labeled; EN 60825-1 Safety of Laser Products-Part 1; FCC Part 15, Subpart B; GOST; EU RoHS Compliant; EN 55022 Class A; EN 55024: 1998; C-Tick; ICES-003, Class A; VCCI Class A; IEC 60950-1 :Second Edition ; IEC 60825-1; EN62479:2010; CSA C22.2 No. 60950-1-07 2nd Edition; EN 609501:2006+A11:2009+A1:2010+A12:2011; IEC 60950-1 (ed.
QuickSpecs HP 2920 Switch Series Technical Specifications Environment 10 Gbps Latency < 3.3 µs (FIFO 64-byte packets) Throughput 95.
QuickSpecs HP 2920 Switch Series Technical Specifications Services Refer to the HP website at www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office. HP 2920-48G Switch (J9728A) I/O ports and slots Power supplies Physical characteristics 44 RJ-45 autosensing 10/100/1000 ports; Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only (IEEE 802.
QuickSpecs HP 2920 Switch Series Technical Specifications Idle power Safety 27 W Emissions CE Labeled; EN 60825-1 Safety of Laser Products-Part 1; FCC Part 15, Subpart B; GOST; EU RoHS Compliant; EN 55022 Class A; EN 55024: 1998; C-Tick; ICES-003, Class A; VCCI Class A; IEC 60825-1; IEC 60950-1, Second Edition; EN62479:2010; CSA C22.2 No. 60950-1-07 2nd Edition; EN 609501:2006+A11:2009+A1:2010+A12:2011; IEC 60950-1 (ed.
QuickSpecs HP 2920 Switch Series Technical Specifications Environment 1000 Mb Latency < 3.2 µs (FIFO 64-byte packets) 10 Gbps Latency < 3.2 µs (FIFO 64-byte packets) Throughput 130.
QuickSpecs HP 2920 Switch Series Technical Specifications Management Services HP PCM+; IMC - Intelligent Management Center; command-line interface; Web browser; configuration menu; out-of-band management (RJ-45 Ethernet); SNMP Manager; Telnet; RMON1; FTP; in-line and outof-band; out-of-band management (serial RS-232C or Micro USB) Refer to the HP website at www.hp.com/networking/services for details on the service-level descriptions and product numbers.
QuickSpecs HP 2920 Switch Series Technical Specifications Safety Maximum heat dissipation 399 BTU/hr (420.95 kJ/hr) AC voltage 100-240 VAC Maximum power rating 487 W Idle power 46 W PoE power 740 W Emissions CE Labeled; EN 60825-1 Safety of Laser Products-Part 1; FCC Part 15, Subpart B; GOST; EU RoHS Compliant; EN 55022 Class A; EN 55024: 1998; C-Tick; ICES-003, Class A; VCCI Class A; IEC 60950-1 :Second Edition ; IEC 60825-1; EN62479:2010; CSA C22.2 No.
QuickSpecs HP 2920 Switch Series Technical Specifications Statistics only) RFC 3416 (SNMP Protocol Operations v2) RFC 3417 (SNMP Transport Mappings) HTML and telnet management HTTP, SSHv1, and Telnet Multiple Configuration Files Multiple Software Images SNMP v3 and RMON RFC support SSHv1/SSHv2 Secure Shell TACACS/TACACS+ Web UI General protocols IEEE 802.1AX-2008 Link Aggregation IEEE 802.1D MAC Bridges IEEE 802.1p Priority IEEE 802.1Q VLANs IEEE 802.1s Multiple Spanning Trees IEEE 802.
QuickSpecs HP 2920 Switch Series Technical Specifications of the Simple Network Management Protocol (SNMPv3) RFC 3415 View-based Access Control Model (VACM) for the Simple Network Management Protocol (SNMP) RFC 3416 Protocol Operations for SNMP RFC 3417 Transport Mappings for the Simple Network Management Protocol (SNMP) RFC 3418 Management Information Base (MIB) for the Simple Network Management Protocol (SNMP) RFC 3576 Ext to RADIUS (CoA only) RFC 4541 Considerations for Internet Group Management Protoc
QuickSpecs HP 2920 Switch Series Technical Specifications RFC 1213 MIB II RFC 1493 Bridge MIB RFC 1724 RIPv2 MIB RFC 2021 RMONv2 MIB RFC 2578 Structure of Management Information Version 2 (SMIv2) RFC 2579 Textual Conventions for SMIv2 RFC 2580 Conformance Statements for SMIv2 RFC 2613 SMON MIB RFC 2618 RADIUS Client MIB RFC 2620 RADIUS Accounting MIB RFC 2665 Ethernet-Like-MIB RFC 2668 802.3 MAU MIB RFC 2674 802.1p and IEEE 802.
QuickSpecs HP 2920 Switch Series Technical Specifications IEEE 802.1P (CoS) RFC 2474 DiffServ Precedence, including 8 queues/port RFC 2597 DiffServ Assured Forwarding (AF) RFC 2598 DiffServ Expedited Forwarding (EF) Ingress Rate Limiting Security IEEE 802.1X Port Based Network Access Control IEEE 802.
QuickSpecs HP 2920 Switch Series Accessory Product Details NOTE: Details are not available for all accessories. The following specifications were available at the time of publication. HP 0.
QuickSpecs HP 2920 Switch Series Accessory Product Details HP 1 m Multimode OM3 LC/LC Optical Cable (AJ834A) Cabling Cable type: 50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m Maximum distance: 10Gbps Transfer Rate (Ethernet): 300m Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end and LC duplex
QuickSpecs HP 2920 Switch Series Accessory Product Details HP 2 m Multimode OM3 LC/LC Optical Cable (AJ835A) Cabling Cable type: 50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m; Maximum distance: 10Gbps Transfer Rate (Ethernet): 300m Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end and LC duple
QuickSpecs HP 2920 Switch Series Accessory Product Details HP 5 m Multimode OM3 LC/LC Optical Cable (AJ836A) Cabling Cable type: 50/125 µm core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m; Maximum distance: 10Gbps Transfer Rate (Ethernet): 300m Cable Specs: This specification defines the detail requirements for a tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet as
QuickSpecs HP 2920 Switch Series Accessory Product Details HP 15 m Multimode OM3 LC/LC Optical Cable (AJ837A) Cabling Cable type: 50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m; Maximum distance: 10Gbps Transfer Rate (Ethernet): 300m Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end and LC dupl
QuickSpecs HP 2920 Switch Series Accessory Product Details HP 30 m Multimode OM3 LC/LC Optical Cable (AJ838A) Cabling Cable type: 50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m; Maximum distance: 10Gbps Transfer Rate (Ethernet): 300m Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end and LC dupl
QuickSpecs HP 2920 Switch Series Accessory Product Details HP 50 m Multimode OM3 LC/LC Optical Cable (AJ839A) Cabling Cable type: 50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m; Maximum distance: 10Gbps Transfer Rate (Ethernet): 300m Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end and LC dupl
QuickSpecs HP 2920 Switch Series Accessory Product Details HP Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable (QK732A) Notes Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um duplex cable and Ethernet assembly with LC duplex connectors on each end.
QuickSpecs HP 2920 Switch Series Accessory Product Details HP Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable (QK734A) Notes Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um duplex cable and Ethernet assembly with LC duplex connectors on each end.
QuickSpecs HP 2920 Switch Series Accessory Product Details HP Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable (QK736A) Notes Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um duplex cable and Ethernet assembly with LC duplex connectors on each end.
QuickSpecs HP 2920 Switch Series Accessory Product Details HP X410 1U Universal 4post Rack Mounting Kit (J9583A) Notes Services The rack mounting kit supports the 1U, full width switches in the following switch series and the power supply: V1810 Series, E2510 Series, E2520 Series, E2610 Series, E2810 Series, E2910 Series, E3500 Series, and the E620 Power Supply This universal rack mounting kit is design to fit the following racks: HP 10K 10642, HP 10K 10842, Panduit CN, Panduit CS, Wrightline Vantage S
QuickSpecs HP 2920 Switch Series Accessory Product Details Services requirements. 3-Year, 9x5 SW phone support, software updates (UQ124E) 3-year, 24x7 SW phone support, software updates (UQ125E) Refer to the HP website at www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office. HP Identity Driven Manager 3.
QuickSpecs HP 2920 Switch Series Accessory Product Details HP Identity Driven Manager 3.0 Software-Unlimited-User License (J9439A) Identity Driven Manager 3.0 software and license for managing an unlimited number of users. RADIUS server support Features Microsoft Network Policy Server on Windows Server 2008 (32-bit) Microsoft Internet Authentication Service (IAS) on Windows Server 2003 (32bit) FreeRADIUS supplied with Red Hat Enterprise Linux (4.7 and 5.
QuickSpecs HP 2920 Switch Series Accessory Product Details To learn more, visit: www.hp.com/networking © Copyright 2014 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty.