Product Data Sheet / Brochure

Models
ModelsModels
Models
HP 600 Redundant and External Power Supply J8168A
Product overview
Product overviewProduct overview
Product overview
The HP 600 Redundant and External Power Supply (RPS/EPS) has two different power supplies embedded: one for 12 V and the
other one for 50 V. The 12 V power supply is called a redundant power supply (RPS) and the 50 V power supply is called the external
PoE power supply (EPS). The RPS has six ports offering redundant power to any one of up to six 2600 switches. The EPS has two ports
and can power up to 24 Power over Ethernet (PoE) ports with full 15.4 W PoE power, if only one of the EPS ports is used.
Alternatively, it can simultaneously power up to 12 ports with full 15.4 W of PoE power on each of two switches if both EPS ports are
used. The pair of EPS ports can supply up to 408 W of PoE power.
Features and benefits
Features and benefitsFeatures and benefits
Features and benefits
Additional information
Additional informationAdditional information
Additional information
Power distribution on an "as-needed" basis
Power distribution on an "as-needed" basisPower distribution on an "as-needed" basis
Power distribution on an "as-needed" basis : monitors power supplies from connected switch or switches; when power from a
switch fails, it provides backup power in less than 1 millisecond
RPS device prioritization
RPS device prioritizationRPS device prioritization
RPS device prioritization : if the internal power supply of more than one of the connected switches fails, redundant power is
provided to the highest-priority switch; RPS port 1 has the highest priority, whereas port 6 has the lowest priority
Redundant switch power
Redundant switch powerRedundant switch power
Redundant switch power (six ports): provides redundant power to any one of up to six switch products, backing up the power
supply in a switch in case of loss of AC power or a fault condition
External switch power
External switch powerExternal switch power
External switch power (two ports): provides external power to up to two PoE switch devices through two EPS ports; supports up
to 15.4 W per port on 48-port stackable
Hot-plugging
Hot-pluggingHot-plugging
Hot-plugging : supports changing the configuration of an RPS or EPS cable while the device is powered
Supports HP chassis and stackable products
Supports HP chassis and stackable productsSupports HP chassis and stackable products
Supports HP chassis and stackable products : power supply units can be configured to support both chassis and stackable
switches
Cables included
Cables includedCables included
Cables included : includes two 2-meter EPS cables and six 1.26-meter RPS cables
QuickSpecs
HP 600 Redundant and External Power Supply
HP 600 Redundant and External Power SupplyHP 600 Redundant and External Power Supply
HP 600 Redundant and External Power Supply
Overview
DA - 11992 Worldwide — Version 12 — November 2, 2011 Page 1