Datasheet

ManualsBrandsHP ManualsNetworkingJ9853A#ABB

QuickSpecs

HP 2530 Switch Series

Overview

c04111414 - DA – 14447 Worldwide — Version 7 —August 18, 2014

Page 1

HP 2530 Switch Series

Models

HP 2530-48G-PoE+ Switch

J9772A

HP 2530-24G-PoE+ Switch

J9773A

HP 2530-8G-PoE+ Switch

J9774A

HP 2530-48-PoE+ Switch

J9778A

HP 2530-24-PoE+ Switch

J9779A

HP 2530-8-PoE+ Switch

J9780A

HP 2530-48G Switch

J9775A

HP 2530-24G Switch

J9776A

HP 2530-8G Switch

J9777A

HP 2530-48 Switch

J9781A

HP 2530-24 Switch

J9782A

HP 2530-8 Switch

J9783A

HP 2530-48G-PoE+-2SFP+ Switch

J9853A

HP 2530-24G-PoE+-2SFP+ Switch

J9854A

HP 2530-48G-2SFP+ Switch

J9855A

HP 2530-24G-2SFP+ Switch

J9856A

Key features

 Cost-effective, reliable, secure, and fully managed L2 switches

 8, 24, or 48 Gigabit or Fast Ethernet ports with up to four Gigabit or two 10 Gigabit uplink ports

 PoE+ models for voice, video, and wireless deployments

 Access control lists (ACLs), EEE, and IPv4/IPv6 host support

 Lifetime warranty, all software releases, and technical phone support

Introduction

The HP 2530 Switch Series consists of 16 fully managed L2 edge switches that deliver cost-effective, reliable, secure, and easy-to-

use connectivity to business networks. Designed for entry-level to midsize enterprise networks, these Gigabit and Fast Ethernet

switches deliver full L2 capabilities with optional Power over Ethernet (PoE), enhanced access security, traffic prioritization, and

IPv6 host support.

The HP 2530 Switch Series offers uplink flexibility with either four Gigabit or two 10 Gigabit Ethernet uplinks on some 24- and 48-

port models. The Gigabit 24- and 48-port models have either two small form-factor pluggable plus (SFP+) or four small form-

factor pluggable (SFP) slots for fiber connectivity. The Fast Ethernet 24- and 48-port models have two SFPs and two RJ-45 Gigabit

uplinks. The compact and fan-less 8-port switches offer additional flexibility with two dual-personality ports that can be used as

either RJ-45 Gigabit Ethernet or SFP ports. Moreover, the HP 2530 PoE+ Switches are IEEE 802.3af and IEEE 802.3at compliant

with up to 30 W per port, making them suitable for voice, video, or wireless deployments with PoE+.

The switch series is easy to use, deploy, and manage via the SNMP, CLI, and Web GUI. It offers flexible wall, table, and rack

mounting options; quiet operation with fan-less and variable-speed fan models; and improved power savings with features such

as IEEE 802.3az energy-efficient Ethernet. And it includes a lifetime warranty, all software releases, and technical phone support.

Features and Benefits

Quality of Service (QoS)

 Traffic prioritization (IEEE 802.1p)

allows real-time traffic classification with support for eight priority levels mapped to either two or four queues; uses

Summary of content (56 pages)

PAGE 1
QuickSpecs HP 2530 Switch Series Overview HP 2530 Switch Series Models HP 2530-48G-PoE+ Switch HP 2530-24G-PoE+ Switch HP 2530-8G-PoE+ Switch HP 2530-48-PoE+ Switch HP 2530-24-PoE+ Switch HP 2530-8-PoE+ Switch HP 2530-48G Switch HP 2530-24G Switch HP 2530-8G Switch HP 2530-48 Switch HP 2530-24 Switch HP 2530-8 Switch HP 2530-48G-PoE+-2SFP+ Switch HP 2530-24G-PoE+-2SFP+ Switch HP 2530-48G-2SFP+ Switch HP 2530-24G-2SFP+ Switch J9772A J9773A J9774A J9778A J9779A J9780A J9775A J9776A J9777A J9781A J9782A J9
PAGE 2
QuickSpecs HP 2530 Switch Series Overview      weighted deficit round robin (WDRR) or strict priority (SP) Simplified QoS configuration o Port-based prioritize traffic by specifying a port and priority level o VLAN-based prioritize traffic by specifying a VLAN and priority level Class of Service (CoS) sets the IEEE 802.
PAGE 3
QuickSpecs HP 2530 Switch Series Overview Power and fault LEDs display any issues Comware CLI o Comware-compatible CLI bridges the experience of HP Comware CLI users who are using the HP ProVision software CLI o Display and fundamental Comware CLI commands are embedded in the switch CLI as native commands; display output is formatted as on Comware-based switches, and fundamental commands provide a Comware-familiar initial switch setup o Configuration Comware CLI commands when Comware commands are entered,
PAGE 4
QuickSpecs HP 2530 Switch Series Overview  allows automatic learning and dynamic assignment of VLANs Rapid Per-VLAN Spanning Tree (RPVST+) allows each VLAN to build a separate spanning tree to improve link bandwidth usage; is compatible with PVST+ Security                   Access control lists (ACLs) accommodates IPv4/IPv6 port and VLAN-based ACLs (IPv6 ACL is supported only on Gigabit Ethernet and 48-port models) Source-port filtering allows only specified ports to communicate wi
PAGE 5
QuickSpecs HP 2530 Switch Series Overview   blocks DHCP packets from unauthorized DHCP servers, preventing denial-of-service attacks Dynamic ARP protection: blocks ARP broadcasts from unauthorized hosts, preventing eavesdropping or theft of network data Dynamic IP lockdown works with DHCP protection to block traffic from unauthorized hosts, preventing IP source address spoofing Convergence        LLDP-MED (Media Endpoint Discovery) defines a standard extension of LLDP that stores values for pa
PAGE 6
QuickSpecs HP 2530 Switch Series Overview provides highly integrated, high-performance switch design with a nonblocking architecture Flexibility    Flexible mounting o Rackable accommodates mounting in a standard 19-inch rack using included hardware o Wall mountable allows the switch to be mounted to a wall using included hardware o Surface mountable allows the switch to be mounted above or below a surface (such as a desk or table) with included hardware Quiet operation lowers noise for deployments i
PAGE 7
QuickSpecs HP 2530 Switch Series Configuration Build To Order: BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or Rack-Shippable solution.
PAGE 8
QuickSpecs HP 2530 Switch Series Configuration HP 2530-24-PoE+ Switch      24 RJ-45 autosensing 10/100 PoE+ ports 2 fixed Gigabit Ethernet SFP ports (Min 0 // Max 2 SFP) 2 RJ-45 autosensing 10/100/1000 ports Power Supply Included 1U - Height PDU CABLE NA/MEX/TW/JP  J9779A#B2B C15 PDU Jumper Cord (NA/MEX/TW/JP) PDU CABLE ROW  J9779A#B2C C15 PDU Jumper Cord (ROW) HP 2530-24G Switch     24 RJ-45 autosensing 10/100/1000 ports 4 fixed Gigabit Ethernet SFP ports (Min 0 // Max 4 SFP) Power Su
PAGE 9
QuickSpecs HP 2530 Switch Series Configuration HP 2530-24G-PoE+ Switch     24 RJ-45 autosensing 10/100/1000 PoE+ ports 4 fixed Gigabit Ethernet SFP ports (Min 0 // Max 4 SFP) Power Supply Included 1U - Height PDU CABLE NA/MEX/TW/JP  J9773A#B2B C15 PDU Jumper Cord (NA/MEX/TW/JP) PDU CABLE ROW  J9773A#B2C C15 PDU Jumper Cord (ROW) HP 2530-24G-PoE+-2SFP+ Switch     24 RJ-45 autosensing 10/100/1000 PoE+ ports 2 SFP+ ports (Min 0 // Max 2 SFP+) Power Supply Included 1U - Height PDU Cable NA
PAGE 10
QuickSpecs HP 2530 Switch Series Configuration HP 2530-48-PoE+ Switch      48 RJ-45 autosensing 10/100 PoE+ ports 2 fixed Gigabit Ethernet SFP ports (Min 0 // Max 2 SFP) 2 RJ-45 autosensing 10/100/1000 ports Power Supply Included 1U - Height PDU CABLE NA/MEX/TW/JP  J9778A#B2B C15 PDU Jumper Cord (NA/MEX/TW/JP) PDU CABLE ROW  J9778A#B2C C15 PDU Jumper Cord (ROW) HP 2530-48G Switch     48 RJ-45 autosensing 10/100/1000 ports 4 fixed Gigabit Ethernet SFP ports (Min 0 // Max 4 SFP) Power Su
PAGE 11
QuickSpecs HP 2530 Switch Series Configuration   Power Supply Included 1U - Height PDU CABLE NA/MEX/TW/JP  J9772A#B2B C15 PDU Jumper Cord (NA/MEX/TW/JP) PDU CABLE ROW  J9772A#B2C C15 PDU Jumper Cord (ROW) HP 2530-48G-PoE+-2SFP+ Switch     48 RJ-45 autosensing 10/100/1000 ports 2 SFP+ ports (Min 0 // Max 2 SFP+) Power Supply Included 1U - Height J9853A See Configuration Note: 2, 4 PDU Cable NA/MEX/TW/JP C15 PDU Jumper Cord (NA/MEX/TW/JP) J9853A#B2B PDU Cable ROW C15 PDU Jumper Cord (RO
PAGE 12
QuickSpecs HP 2530 Switch Series Configuration HP X121 1G SFP RJ45 T Transceiver HP X122 1G SFP LC BX-D Transceiver HP X122 1G SFP LC BX-U Transceiver HP X132 10G SFP+ LC ER Transceiver HP X132 10G SFP+ LC SR Transceiver HP X132 10G SFP+ LC LR Transceiver HP X132 10G SFP+ LC LRM Transceiver HP X242 10G SFP+ to SFP+ 1m Direct Attach Copper Cable HP X242 10G SFP+ to SFP+ 3m Direct Attach Copper Cable HP X242 10G SFP+ to SFP+ 7m Direct Attach Copper Cable HP X244 10G XFP to SFP+ 1m Direct Attach Copper Cable
PAGE 13
QuickSpecs HP 2530 Switch Series Configuration  1U - Height PDU CABLE NA/MEX/TW/JP  J9779A#B2B C15 PDU Jumper Cord (NA/MEX/TW/JP) PDU CABLE ROW  J9779A#B2C C15 PDU Jumper Cord (ROW) HP 2530-24G Switch     24 RJ-45 autosensing 10/100/1000 ports 4 fixed Gigabit Ethernet SFP ports (Min 0 // Max 4 SFP) Power Supply Included 1U - Height PDU CABLE NA/MEX/TW/JP  J9776A#B2B C15 PDU Jumper Cord (NA/MEX/TW/JP) PDU CABLE ROW  J9776A#B2C C15 PDU Jumper Cord (ROW) HP 2530-24G-2SFP+ Switch  
PAGE 14
QuickSpecs HP 2530 Switch Series Configuration  1U - Height PDU CABLE NA/MEX/TW/JP  J9773A#B2B C15 PDU Jumper Cord (NA/MEX/TW/JP) PDU CABLE ROW  J9773A#B2C C15 PDU Jumper Cord (ROW) HP 2530-24G-PoE+-2SFP+ Switch     24 RJ-45 autosensing 10/100/1000 PoE+ ports 2 SFP+ ports (Min 0 // Max 2 SFP+) Power Supply Included 1U - Height PDU Cable NA/MEX/TW/JP  J9854A#B2B C15 PDU Jumper Cord (NA/MEX/TW/JP) PDU Cable ROW  J9854A#B2C C15 PDU Jumper Cord (ROW) HP 2530-48 Switch      48 RJ
PAGE 15
QuickSpecs HP 2530 Switch Series Configuration   Power Supply Included 1U - Height PDU CABLE NA/MEX/TW/JP  J9778A#B2B C15 PDU Jumper Cord (NA/MEX/TW/JP) PDU CABLE ROW  J9778A#B2C C15 PDU Jumper Cord (ROW) HP 2530-48G Switch     48 RJ-45 autosensing 10/100/1000 ports 4 fixed Gigabit Ethernet SFP ports (Min 0 // Max 4 SFP) Power Supply Included 1U - Height PDU CABLE NA/MEX/TW/JP  J9775A#B2B C15 PDU Jumper Cord (NA/MEX/TW/JP) PDU CABLE ROW  J9775A#B2C C15 PDU Jumper Cord (ROW) HP 25
PAGE 16
QuickSpecs HP 2530 Switch Series Configuration PDU CABLE NA/MEX/TW/JP  J9772A#B2B C15 PDU Jumper Cord (NA/MEX/TW/JP) PDU CABLE ROW  J9772A#B2C C15 PDU Jumper Cord (ROW) HP 2530-48G-PoE+-2SFP+ Switch     48 RJ-45 autosensing 10/100/1000 ports 2 SFP+ ports (Min 0 // Max 2 SFP+) Power Supply Included 1U - Height J9853A See Configuration Note: 2, 3, 4, 5 PDU Cable NA/MEX/TW/JP C15 PDU Jumper Cord (NA/MEX/TW/JP) J9853A#B2B PDU Cable ROW C15 PDU Jumper Cord (ROW) J9853A#B2C Configuration Rule
PAGE 17
QuickSpecs HP 2530 Switch Series Configuration HP X121 1G SFP LC SX Transceiver HP X121 1G SFP LC LX Transceiver HP X121 1G SFP LC LH Transceiver HP X121 1G SFP RJ45 T Transceiver HP X122 1G SFP LC BX-D Transceiver HP X122 1G SFP LC BX-U Transceiver HP X132 10G SFP+ LC ER Transceiver HP X132 10G SFP+ LC SR Transceiver HP X132 10G SFP+ LC LR Transceiver HP X132 10G SFP+ LC LRM Transceiver HP X242 10G SFP+ to SFP+ 1m Direct Attach Copper Cable HP X242 10G SFP+ to SFP+ 3m Direct Attach Copper Cable HP X242 1
PAGE 18
QuickSpecs HP 2530 Switch Series Configuration HP X121 1G SFP RJ45 T Transceiver J8177C SFP+ Transceivers HP X132 10G SFP+ LC ER Transceiver HP X132 10G SFP+ LC SR Transceiver HP X132 10G SFP+ LC LR Transceiver HP X132 10G SFP+ LC LRM Transceiver HP X242 10G SFP+ to SFP+ 1m Direct Attach Copper Cable HP X242 10G SFP+ to SFP+ 3m Direct Attach Copper Cable HP X242 10G SFP+ to SFP+ 7m Direct Attach Copper Cable HP X244 10G XFP to SFP+ 1m Direct Attach Copper Cable HP 10G X244 XFP to SFP+ 3m Direct Attach C
PAGE 19
QuickSpecs HP 2530 Switch Series Configuration HP 2530 8-port Switch Power Adapter Shelf J9820A See Configuration Note:1 Configuration Rules: Note 1 This Power Adapter Shelf is supported only on the J9783A, J9780A, J9777A and J9774A. Rack Mount Kit HP X410 1U Universal 4-post Rack Mounting Kit J9583A See Configuration Note:1, 2 Configuration Rules: Note 1 If this Mounting Kit is order with #0D1 then it integrates to the HP Universal Rack.
PAGE 20
QuickSpecs HP 2530 Switch Series Technical Specifications HP 2530-48G-PoE+ Switch (J9772A) I/O ports and slots 48 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.
PAGE 21
QuickSpecs HP 2530 Switch Series Technical Specifications Safety Emissions Immunity Management Notes Services HP 2530-24G-PoE+ Switch (J9773A) I/O ports and slots Additional ports and slots Physical characteristics Memory and processor Mounting and enclosure Performance Environment UL 60950-1; CAN/CSA 22.2 No.
PAGE 22
QuickSpecs HP 2530 Switch Series Technical Specifications Operating relative humidity Non-operating/ Storage temperature Non-operating/Storage relative humidity Altitude Acoustic Electrical characteristics Frequency Maximum heat dissipation Safety Emissions Immunity Management Notes 15% to 95% @ 104°F (40°C), noncondensing -40°F to 158°F (-40°C to 70°C) 15% to 90% @ 149°F (65°C), noncondensing up to 10,000 ft (3 km) Power: 43.9 dB, Pressure: 39.6 dB 50/60 Hz 135 BTU/hr (142.
PAGE 23
QuickSpecs HP 2530 Switch Series Technical Specifications Services revision "B" or later (product number ends with the letter "B" or later, e.g., J4858B, J4859C) are required. Refer to the HP website at www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.
PAGE 24
QuickSpecs HP 2530 Switch Series Technical Specifications Notes Safety Emissions Immunity Management Notes Services Idle power is the actual power consumption of the device with no ports connected. Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. PoE power is the total power budget available to all PoE ports.
PAGE 25
QuickSpecs HP 2530 Switch Series Technical Specifications Memory and processor Processor ARM9E @ 800 MHz, 128 MB flash, 256 MB DDR3 DIMM; packet buffer size: 3 MB dynamically allocat Mounting and enclosure Mounts in an EIA-standard 19-inch telco rack or equipment cabinet (rackmounting kit available); horizontal surface mounting; wall mounting Performance IPv6 Ready Certified 100 Mb Latency < 6.6 µs (LIFO 64-byte packets) 1000 Mb Latency < 2.
PAGE 26
QuickSpecs HP 2530 Switch Series Technical Specifications Management Notes Services Conducted IEC 61000-4-6 Power frequency IEC 61000-4-8 magnetic field Voltage dips and IEC 61000-4-11 interruptions Harmonics EN 61000-3-2, IEC 61000-3-2 Flicker EN 61000-3-3, IEC 61000-3-3 IMC - Intelligent Management Center; command-line interface; Web browser; configuration menu; out-of-band management (serial RS-232C or Micro USB); IEEE 802.3 Ethernet MIB; Repeater MIB; Ethernet Interface MIB IEEE 802.
PAGE 27
QuickSpecs HP 2530 Switch Series Technical Specifications Altitude Acoustic Electrical characteristics Frequency Maximum heat dissipation Safety Emissions Immunity Management Notes Services up to 10,000 ft (3 km) Power: 40.4 dB, Pressure: 31.7 dB 50/60 Hz 99 BTU/hr (104.45 kJ/hr), (switch only: 99 BTU/hr; combined switch + max. PoE devices: 809 BTU/hr) AC voltage 100 - 127 / 200 - 240 VAC Current 2.8/1.4 A Maximum power rating 237 W Idle power 21.
PAGE 28
QuickSpecs HP 2530 Switch Series Technical Specifications HP 2530-8-PoE+ Switch (J9780A) I/O ports and slots Additional ports and slots Physical characteristics 8 RJ-45 autosensing 10/100 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3at PoE+); Media Type: Auto-MDIX; Duplex: half or full 2 dual-personality ports; each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100BaseTx; IEEE 802.
PAGE 29
QuickSpecs HP 2530 Switch Series Technical Specifications Safety Emissions Immunity Management Notes Services HP 2530-48G Switch (J9775A) and all modules populated. PoE power is the total power budget available to all PoE ports. UL 60950-1; CAN/CSA 22.2 No.
PAGE 30
QuickSpecs HP 2530 Switch Series Technical Specifications Switching capacity MAC address table size Environment Operating temperature Operating relative humidity Non-operating/ Storage temperature Non-operating/Storage relative humidity Altitude Acoustic Electrical characteristics Frequency Maximum heat dissipation AC voltage Current Maximum power rating Idle power Notes Safety Emissions Immunity Management Notes 104 Gbps 16000 entries 32°F to 113°F (0°C to 45°C) 15% to 95% @ 104°F (40°C), noncondensi
PAGE 31
QuickSpecs HP 2530 Switch Series Technical Specifications Services HP 2530-24G Switch (J9776A) I/O ports and slots Additional ports and slots Physical characteristics apply to PoE+ models only. When using SFPs with this product, SFPs with revision "B" or later (product number ends with the letter "B" or later, e.g., J4858B, J4859C) are required. Refer to the HP website at www.hp.com/networking/services for details on the service-level descriptions and product numbers.
PAGE 32
QuickSpecs HP 2530 Switch Series Technical Specifications Safety Emissions Immunity Management Notes Services HP 2530-8G Switch (J9777A) I/O ports and slots Additional ports and slots Physical characteristics Memory and processor Mounting and enclosure Performance infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. UL 60950-1; CAN/CSA 22.2 No.
PAGE 33
QuickSpecs HP 2530 Switch Series Technical Specifications 100 Mb Latency 1000 Mb Latency Throughput Switching capacity MAC address table size Environment Operating temperature Operating relative humidity Non-operating/ Storage temperature Non-operating/Storage relative humidity Altitude Acoustic Electrical characteristics Frequency Maximum heat dissipation AC voltage Current Maximum power rating Idle power Notes Safety Emissions Immunity Management < 7.4 µs (LIFO 64-byte packets) < 2.
PAGE 34
QuickSpecs HP 2530 Switch Series Technical Specifications Notes Services HP 2530-48 Switch (J9781A) I/O ports and slots Additional ports and slots Physical characteristics IEEE 802.3az applies to Gigabit models only; IEEE 802.3at and IEEE 802.3af apply to PoE+ models only. When using SFPs with this product, SFPs with revision "B" or later (product number ends with the letter "B" or later, e.g., J4858B, J4859C) are required. Refer to the HP website at www.hp.
PAGE 35
QuickSpecs HP 2530 Switch Series Technical Specifications Safety Emissions Immunity Management Notes Services HP 2530-24 Switch (J9782A) I/O ports and slots Additional ports and slots Physical characteristics Memory and processor Mounting and enclosure the device with no ports connected.
PAGE 36
QuickSpecs HP 2530 Switch Series Technical Specifications mounting kit available); horizontal surface mounting; wall mounting Performance IPv6 Ready Certified 100 Mb Latency < 1.7 µs (LIFO 64-byte packets) 1000 Mb Latency < 1.1 µs (LIFO 64-byte packets) Throughput 9.5 Mpps (64-byte packets) Switching capacity 12.
PAGE 37
QuickSpecs HP 2530 Switch Series Technical Specifications Management Notes Services HP 2530-8 Switch (J9783A) I/O ports and slots Additional ports and slots Physical characteristics IMC - Intelligent Management Center; command-line interface; Web browser; configuration menu; Out-of-band management (serial RS-232C or MicroUSB); IEEE 802.3 Ethernet MIB; Repeater MIB; Ethernet Interface MIB IEEE 802.3az applies to Gigabit models only; IEEE 802.3at and IEEE 802.3af apply to PoE+ models only.
PAGE 38
QuickSpecs HP 2530 Switch Series Technical Specifications Idle power Notes Safety Emissions Immunity Management Notes Services HP 2530-48G-PoE+2SFP+ Switch (J9853A) 4.5 W Idle power is the actual power consumption of the device with no ports connected. Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.
PAGE 39
QuickSpecs HP 2530 Switch Series Technical Specifications Mounting and enclosure Mounts in an EIA-standard 19-inch telco rack or equipment cabinet (rackmounting kit available); horizontal surface mounting; wall mounting Performance IPv6 Ready Certified 100 Mb Latency < 7.3 µs (LIFO 64-byte packets) 1000 Mb Latency < 2.7 µs (LIFO 64-byte packets) 10 Gbps Latency < 4.
PAGE 40
QuickSpecs HP 2530 Switch Series Technical Specifications Management Notes Services HP 2530-24G-PoE+2SFP+ Switch (J9854A) magnetic field Voltage dips and IEC 61000-4-11 interruptions Harmonics EN 61000-3-2, IEC 61000-3-2 Flicker EN 61000-3-3, IEC 61000-3-3 IMC - Intelligent Management Center; command-line interface; Web browser; configuration menu; out-of-band management (serial RS-232C or Micro USB); IEEE 802.3 Ethernet MIB; Repeater MIB; Ethernet Interface MIB IEEE 802.
PAGE 41
QuickSpecs HP 2530 Switch Series Technical Specifications Electrical characteristics Frequency Maximum heat dissipation Safety Emissions Immunity Management Notes Services HP 2530-48G-2SFP+ I/O ports and slots 50/60 Hz 118 BTU/hr (124.49 kJ/hr), (switch only: 118 BTU/hr; combined switch + max. PoE devices: 757 BTU/hr) AC voltage 100 - 127 / 200 - 240 VAC Current 2.9/1.4 A Maximum power rating 222.2 W Idle power 24.
PAGE 42
QuickSpecs HP 2530 Switch Series Technical Specifications Switch (J9855A) 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 2 SFP+ fixed 1000/10000 SFP+ ports Additional ports and slots 1 dual-personality (RJ-45 or USB micro-B) serial console port Physical characteristics Dimensions 17.44(w) x 10.00(d) x 1.75(h) in (44.3 x 25.4 x 4.45 cm) (1U height) Weight 7.1 lb (3.
PAGE 43
QuickSpecs HP 2530 Switch Series Technical Specifications Emissions Immunity Management Notes Services HP 2530-24G-2SFP+ Switch (J9856A) FCC Class A; EN 55022/CISPR-22 Class A; VCCI Class A Generic EN 55024, CISPR 24 EN EN 55024, CISPR 24 ESD IEC 61000-4-2 Radiated IEC 61000-4-3 EFT/Burst IEC 61000-4-4 Surge IEC 61000-4-5 Conducted IEC 61000-4-6 Power frequency IEC 61000-4-8 magnetic field Voltage dips and IEC 61000-4-11 interruptions Harmonics EN 61000-3-2, IEC 61000-3-2 Flicker EN 61000-3-3, IEC 61
PAGE 44
QuickSpecs HP 2530 Switch Series Technical Specifications Environment Operating temperature Operating relative humidity Non-operating/ Storage temperature Non-operating/Storage relative humidity Altitude Acoustic Electrical characteristics Frequency Maximum heat dissipation AC voltage Current Maximum power rating Idle power Notes Safety Emissions Immunity Management Notes 32°F to 113°F (0°C to 45°C) 15% to 95% @ 104°F (40°C), noncondensing -40°F to 158°F (-40°C to 70°C) 15% to 90% @ 149°F (65°C), non
PAGE 45
QuickSpecs HP 2530 Switch Series Technical Specifications Services Standards and protocols Denial of service (applies to all products in protection series) Device management General protocols IP multicast IPv6 This product supports only 1 Gigabit SFP & 10 Gigabit SFP+ transceivers, as well as 10 Gigabit Direct Attach Cables. Refer to the HP website at www.hp.com/networking/services for details on the service-level descriptions and product numbers.
PAGE 46
QuickSpecs HP 2530 Switch Series Technical Specifications MIBs Network management QoS/CoS Security RFC 4251 SSHv6 Architecture RFC 4252 SSHv6 Authentication RFC 4252 SSHv6 Transport Layer RFC 4254 SSHv6 Connection RFC 4293 MIB for IP RFC 4419 Key Exchange for SSH RFC 4443 ICMPv6 RFC 4861 IPv6 Neighbor Discovery RFC 4862 IPv6 Stateless Address Auto-configuration RFC 1212 Concise MIB Definitions RFC 1213 MIB II RFC 1493 Bridge MIB RFC 2021 RMONv2 MIB RFC 2578 Structure of Management Information Version
PAGE 47
QuickSpecs HP 2530 Switch Series Accessories HP 2530 Switch Series accessories Transceivers HP X111 100M SFP LC FX Transceiver HP X112 100M SFP LC BX-D Transceiver HP X112 100M SFP LC BX-U Transceiver HP X121 1G SFP LC SX Transceiver HP X121 1G SFP LC LX Transceiver HP X121 1G SFP LC LH Transceiver HP X122 1G SFP LC BX-D Transceiver HP X122 1G SFP LC BX-U Transceiver HP X121 1G SFP RJ45 T Transceiver HP X132 10G SFP+ LC SR Transceiver HP X132 10G SFP+ LC LR Transceiver HP X132 10G SFP+ LC LRM Transceive
PAGE 48
QuickSpecs HP 2530 Switch Series Accessory Product Details NOTE: Details are not available for all accessories. The following specifications were available at the time of publication. HP X111 100M SFP LC FX Ports Transceiver (J9054C) Physical characteristics Environment Cabling 1 LC 100BASE-FX port (IEEE 802.3u Type 100BASE-FX); Duplex: half or full Dimensions: 2.7(d) x 0.54(w) x 0.48(h) in. (6.86 x 1.38 x 1.22 cm) Weight: 0.06 lb. (0.
PAGE 49
QuickSpecs HP 2530 Switch Series Accessory Product Details Services HP X112 100M SFP LC BX- Ports U Transceiver (J9100B) Physical characteristics A small form-factor pluggable (SFP) 100Megabit BX (biEnvironment directional) "upstream" transceiver that provides 100 Mbps full-duplex connectivity up to 10 km on one strand of singlemode fiber. The Cabling J9100B connects to the J9099B "downstream" transceiver, or to any IEEE-standard 100BASEBX10-D ("downstream") device.
PAGE 50
QuickSpecs HP 2530 Switch Series Accessory Product Details solution Altitude: up to 10,000 ft. (3 km) up to 550 m on multimode Electrical characteristics Power consumption typical: 0.4 W fiber. Power consumption maximum: 0.7 W Cabling Type:  62.5/125 µm or 50/125 µm (core/cladding) diameter, gradedindex, low metal content, multimode fiber optic, complying with ITU-T G.
PAGE 51
QuickSpecs HP 2530 Switch Series Accessory Product Details Services HP X121 1G SFP LC LH Transceiver (J4860C) Ports Physical characteristics A small form-factor pluggable (SFP) Gigabit LH Environment transceiver that provides a full-duplex Gigabit solution up to 70 km on single-mode fiber. Cabling Power Consumption: < 500mW Typical Refer to the HP website at www.hp.com/networking/services for details on the service-level descriptions and product numbers.
PAGE 52
QuickSpecs HP 2530 Switch Series Accessory Product Details Services HP X122 1G SFP LC BX-U Transceiver (J9143B) Ports Physical characteristics A small form-factor pluggable (SFP) GigabitBX (bi-directional) Environment "upstream" transceiver that provides a fullduplex Gigabit solution up to 10 km on one strand of single-mode fiber. The J9143B connects to the Cabling J9142B "downstream" transceiver, or to any IEEE-standard 1000BASEBX10-D ("downstream") device.
PAGE 53
QuickSpecs HP 2530 Switch Series Accessory Product Details Gigabit solution up to 100 m on Category 5 or better cable Cabling Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C) Nonoperating/Storage relative humidity: 0% to 95% @ 77°F (25°C), noncondensing Altitude: up to 10,000 ft. (3000 km) Cable type: 1000BASE-T: Category 5 (5E or better recommended), 100 Ù differential 4-pair unshielded twisted pair (UTP) or shielded twisted pair (STP) balanced, complying with IEEE 802.
PAGE 54
QuickSpecs HP 2530 Switch Series Accessory Product Details c04111414 - DA – 14447 Worldwide — Version 7 —August 18, 2014 Page 54
PAGE 55
QuickSpecs HP 2530 Switch Series Summary of Changes Date 18-Aug-2014 Version History From Version 6 to 7 09-Dec-2013 From Version 5 to 6 Action Added Changed Changed 12-Nov-2013 From Version 4 to 5 Changed 27-Sep-2013 From Version 3 to 4 Changed 17-Sep-2013 10-Jun-2013 From Version 2 to 3 From Version 1 to 2 Changed Changed Description of Change: Added 4 new models: J9856A, J9854A, J9855A, J9853A Changes made on the entire QS.
PAGE 56
QuickSpecs HP 2530 Switch Series Summary of Changes To learn more, visit hp.com/networking © Copyright 2013 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty.