Datasheet

QuickSpecs
HP 2530 Switch Series
Configuration
c04111414 - DA – 14447 Worldwide — Version 7 —August 18, 2014
Page 16
PDU CABLE NA/MEX/TW/JP
J9772A#B2B
 C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU CABLE ROW
J9772A#B2C
 C15 PDU Jumper Cord (ROW)
HP 2530-48G-PoE+-2SFP+ Switch
J9853A
 48 RJ-45 autosensing 10/100/1000 ports
 2 SFP+ ports (Min 0 // Max 2 SFP+)
 Power Supply Included
 1U - Height
See Configuration Note: 2,
3, 4, 5
PDU Cable NA/MEX/TW/JP
J9853A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable ROW
J9853A#B2C
C15 PDU Jumper Cord (ROW)
Configuration Rules:
Note 1
The following Transceivers install into this switch:
HP X121 1G SFP LC SX Transceiver
J4858C
HP X121 1G SFP LC LX Transceiver
J4859C
HP X111 100M SFP LC FX Transceiver
J9054C
HP X112 100M SFP LC BX-D Transceiver
J9099B
HP X112 100M SFP LC BX-U Transceiver
J9100B
HP X121 1G SFP LC LH Transceiver
J4860C
HP X122 1G SFP LC BX-D Transceiver
J9142B
HP X122 1G SFP LC BX-U Transceiver
J9143B
HP X121 1G SFP RJ45 T Transceiver
J8177C
Note 2
If this switch is factory installed in any HP Universal Racks, Then the J9583A#0D1 is required.
Note 3
Localization (Wall Power Cord) required on orders without #B2B, #B2C (PDU Power Cord) . (See
Localization Menu)
REMARK: When Switches/Routers are Factory Racked, Then #B2B, or #B2C should be the Defaulted
Power Cable option on the Switches/Routers.
Note 4
If HP CTO Switch Chassis is selected forRack Level Integration, Then the CTO Switch Chassis needs to
integrate (with #0D1) to the HP Networking Universal Rack.
Note 5
The following Transceivers install into this Switch: