Datasheet

QuickSpecs
HP 2530 Switch Series
Technical Specifications
c04111414 - DA – 14447 Worldwide — Version 7 —August 18, 2014
Page 25
Memory and processor
Processor
ARM9E @ 800 MHz, 128 MB flash, 256 MB DDR3
DIMM; packet buffer size: 3 MB dynamically
allocat
Mounting and enclosure
Mounts in an EIA-standard 19-inch telco rack or equipment cabinet (rack-
mounting kit available); horizontal surface mounting; wall mounting
Performance
IPv6 Ready Certified
100 Mb Latency
< 6.6 µs (LIFO 64-byte packets)
1000 Mb Latency
< 2.2 µs (LIFO 64-byte packets)
Throughput
13 Mpps (64-byte packets)
Switching capacity
17.6 Gbps
MAC address table size
16000 entries
Environment
Operating temperature
32°F to 113°F (0°C to 45°C)
Operating relative
humidity
15% to 95% @ 104°F (40°C), noncondensing
Non-operating/
Storage temperature
-40°F to 158°F (-40°C to 70°C)
Non-operating/Storage
relative humidity
15% to 90% @ 149°F (65°C), noncondensing
Altitude
up to 10,000 ft (3 km)
Acoustic
Power: 37.9 dB, Pressure: 31.8 dB
Electrical characteristics
Frequency
50/60 Hz
Maximum heat
dissipation
170 BTU/hr (179.35 kJ/hr), (switch only: 170
BTU/hr; combined switch + max. PoE devices:
1505 BTU/hr)
AC voltage
100 - 127 / 200 - 240 VAC
Current
5.2/2.6 A
Maximum power rating
441 W
Idle power
37.5 W
PoE power
382 W
Notes
Idle power is the actual power consumption of
the device with no ports connected.
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning the
infrastructure with fully loaded PoE (if
equipped), 100% traffic, all ports plugged in,
and all modules populated.
PoE power is the total power budget available
to all PoE ports.
Safety
UL 60950-1; CAN/CSA 22.2 No. 60950-1; EN 60825; IEC 60950-1; EN
60950-1
Emissions
FCC Class A; EN 55022/CISPR-22 Class A; VCCI Class A
Immunity
Generic
EN 55024, CISPR 24
EN
EN 55024, CISPR 24
ESD
IEC 61000-4-2
Radiated
IEC 61000-4-3
EFT/Burst
IEC 61000-4-4
Surge
IEC 61000-4-5