Datasheet

QuickSpecs
HP 2530 Switch Series
Technical Specifications
c04111414 - DA – 14447 Worldwide — Version 7 —August 18, 2014
Page 31
apply to PoE+ models only. When using SFPs with this product, SFPs with
revision "B" or later (product number ends with the letter "B" or later, e.g.,
J4858B, J4859C) are required.
Services
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
HP 2530-24G Switch
(J9776A)
I/O ports and slots
24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE
802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T)
Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
4 fixed Gigabit Ethernet SFP ports
Additional ports and
slots
1 dual-personality (RJ-45 or USB micro-B) serial console port
Physical characteristics
Dimensions
17.44(w) x 10.00(d) x 1.75(h) in (44.3 x 25.4 x
4.45 cm) (1U height)
Weight
6.1 lb (2.77 kg)
Memory and processor
Processor
ARM9E @ 800 MHz, 128 MB flash, 256 MB DDR3
DIMM; packet buffer size: 1.5 MB dynamically
allocated
Mounting and enclosure
Mounts in an EIA-standard 19-inch telco rack or equipment cabinet (rack-
mounting kit available); horizontal surface mounting; wall mounting
Performance
IPv6 Ready Certified
100 Mb Latency
< 7.4 µs (LIFO 64-byte packets)
1000 Mb Latency
< 2.3 µs (LIFO 64-byte packets)
Throughput
41.6 Mpps (64-byte packets)
Switching capacity
56 Gbps
MAC address table size
16000 entries
Environment
Operating temperature
32°F to 113°F (0°C to 45°C)
Operating relative
humidity
15% to 95% @ 104°F (40°C), noncondensing
Non-operating/
Storage temperature
-40°F to 158°F (-40°C to 70°C)
Non-operating/Storage
relative humidity
15% to 90% @ 149°F (65°C), noncondensing
Altitude
up to 10,000 ft (3 km)
Acoustic
Power: 34.0 dB, Pressure: 26.4 dB
Electrical characteristics
Frequency
50/60 Hz
Maximum heat
dissipation
164 BTU/hr (173.02 kJ/hr)
AC voltage
100-127/200-240 VAC
Current
.6/.4 A
Maximum power rating
48.0 W
Idle power
28.8 W
Notes
Idle power is the actual power consumption of
the device with no ports connected.
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning the