Datasheet

QuickSpecs
HP 2530 Switch Series
Technical Specifications
c04111414 - DA – 14447 Worldwide — Version 7 —August 18, 2014
Page 36
mounting kit available); horizontal surface mounting; wall mounting
Performance
IPv6 Ready Certified
100 Mb Latency
< 1.7 µs (LIFO 64-byte packets)
1000 Mb Latency
< 1.1 µs (LIFO 64-byte packets)
Throughput
9.5 Mpps (64-byte packets)
Switching capacity
12.8 Gbps
MAC address table size
16000 entries
Environment
Operating temperature
32°F to 113°F (0°C to 45°C)
Operating relative
humidity
15% to 95% @ 104°F (40°C), noncondensing
Non-operating/
Storage temperature
-40°F to 158°F (-40°C to 70°C)
Non-operating/Storage
relative humidity
15% to 90% @ 149°F (65°C), noncondensing
Altitude
up to 10,000 ft (3 km)
Acoustic
Power: 0 dB, Pressure: 0 dB
Electrical characteristics
Frequency
50/60 Hz
Maximum heat
dissipation
50 BTU/hr (52.75 kJ/hr)
AC voltage
100 - 127 / 200 - 240 VAC
Current
0.3/0.2 A
Maximum power rating
14.7 W
Idle power
8.4 W
Notes
Idle power is the actual power consumption of
the device with no ports connected.
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning the
infrastructure with fully loaded PoE (if
equipped), 100% traffic, all ports plugged in,
and all modules populated.
Safety
UL 60950-1; CAN/CSA 22.2 No. 60950-1; EN 60825; IEC 60950-1; EN
60950-1
Emissions
FCC Class A; EN 55022/CISPR-22 Class A; VCCI Class A
Immunity
Generic
EN 55024, CISPR 24
EN
EN 55024, CISPR 24
ESD
IEC 61000-4-2
Radiated
IEC 61000-4-3
EFT/Burst
IEC 61000-4-4
Surge
IEC 61000-4-5
Conducted
IEC 61000-4-6
Power frequency
magnetic field
IEC 61000-4-8
Voltage dips and
interruptions
IEC 61000-4-11
Harmonics
EN 61000-3-2, IEC 61000-3-2
Flicker
EN 61000-3-3, IEC 61000-3-3