Datasheet

QuickSpecs
HP 2530 Switch Series
Accessory Product Details
c04111414 - DA – 14447 Worldwide — Version 7 —August 18, 2014
Page 49
Power consumption is 1.1 watt maximum.
For supported platforms and minimum software requirements to support
this product, see the document titled "Support for the HP BX Transceivers"
on the "HP Mini-GBICs and SFPs" Manuals Web page.
The J9099B connects to the J9100B "upstream" transceiver, or to any IEEE-
standard 100BASE-BX10-U ("upstream") device. (A 100-BX-D transceiver
can only connect to a 100-BX-U product. You cannot connect two 100-BX-D
transceivers together.)
Services
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
HP X112 100M SFP LC BX-
U Transceiver (J9100B)
A small form-factor
pluggable (SFP) 100-
Megabit BX (bi-
directional) "upstream"
transceiver that provides
100 Mbps full-duplex
connectivity up to 10 km
on one strand of
singlemode fiber. The
J9100B connects to the
J9099B "downstream"
transceiver, or to any
IEEE-standard 100BASE-
BX10-D ("downstream")
device.
Ports
1 LC 100BASE-BX10 port (IEEE 802.3ah Type 100BASE-BX10-U); Duplex:
full only
Physical characteristics
Dimensions
2.7(d) x 0.55(w) x 0.48(h) in. (6.86 x 1.39 x 1.22
cm)
Weight
0.07 lb. (.03 kg)
Environment
Operating temperature
32ºF to 158ºF (0ºC to 70ºC)
Operating relative
humidity
0% to 95%, noncondensing
Nonoperating/Storage
temperature
-40ºF to 185ºF (-40ºC to 85ºC)
Cabling
Type:
Single-mode fiber optic, complying with ITU-T G.652;
Maximum distance:
 0.5-10,000 m (single-mode fiber)
Notes
For supported platforms and minimum software requirements to support
this product, see the document titled "Support for the HP BX Transceivers"
on the "HP Mini-GBICs and SFPs" Manuals Web page.
The J9100B connects to the J9099B "downstream" transceiver, or to any
IEEE-standard 100BASE-BX10- D ("downstream") device. (A 100-BX-U
transceiver can only connect to a 100-BX-D product. You cannot connect
two 100-BX-U transceivers together.)
Transmit wavelength: 1310 nm. Receive wavelength: 1550 nm.
Power consumption is 1.1 watts maximum.
Services
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
HP X121 1G SFP LC SX
Transceiver (J4858C)
A small form-factor
pluggable (SFP) Gigabit SX
transceiver that provides a
full-duplex Gigabit
Ports
1 LC 1000BASE-SX port; Duplex: full only
Physical characteristics
Dimensions: 2.24(d) x 0.54(w) x 0.48(h) in. (5.69 x 1.37 x 1.22 cm)
Weight: 0.04 lb. (0.02 kg)
Transceiver form factor: SFP
Environment
Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 85%, noncondensing
Nonoperating/Storage temperature: -40°F to 203°F (-40°C to 85°C)