Datasheet

QuickSpecs
HP 2530 Switch Series
Accessory Product Details
c04111414 - DA – 14447 Worldwide — Version 7 —August 18, 2014
Page 52
Power consumption is 1 watt maximum.
For supported platforms and minimum software requirements to support
this product, see the document titled "Support for the HP BX Transceivers"
on the "HP Mini-GBICs and SFPs" Manuals Web page.
The J9142B connects to the J9143B "upstream" transceiver, or to any
IEEE-standard 1000BASE-BX10-U ("upstream") device. (A 1000-BX-D
transceiver can only connect to a 1000-BX-U product. You cannot connect
two 1000-BX-D transceivers together.)
Services
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
HP X122 1G SFP LC BX-U
Transceiver (J9143B)
A small form-factor
pluggable (SFP) Gigabit-
BX (bi-directional)
"upstream" transceiver
that provides a full-
duplex Gigabit solution up
to 10 km on one strand of
single-mode fiber. The
J9143B connects to the
J9142B "downstream"
transceiver, or to any
IEEE-standard 1000BASE-
BX10-D ("downstream")
device.
Ports
1 LC 1000BASE-BX10 port (IEEE 802.3ah Type 1000BASE-BX10-U);
Duplex: full only
Physical characteristics
Dimensions
2.19(d) x 0.54(w) x 0.46(h) in. (5.57 x 1.37 x
1.18 cm)
Weight
0.04 lb. (0.02 kg)
Environment
Operating temperature
32ºF to 158ºF (0ºC to 70ºC)
Operating relative
humidity
0% to 95%, non-condensing
Non-operating/
Storage temperature
–40ºF to 185ºF –40ºC to 85ºC)
Cabling
Type:
Single-mode fiber optic, complying with ITU-T G.652;
Maximum distance:
 0.5-10,000 m (single-mode fiber)
Notes
Transmit wavelength: 1310 nm. Receive wavelength: 1490 nm.
For supported platforms and minimum software requirements to support
this product, see the document titled "Support for the HP BX Transceivers"
on the "HP Mini-GBICs and SFPs" Manuals Web page.
The J9143B connects to the J9142B "downstream" transceiver, or to any
IEEE-standard 1000BASE-BX10-D ("downstream") device. (A 1000-BX-U
transceiver can only connect to a 1000-BX-D product. You cannot connect
two 1000-BX-U transceivers together.)
Power consumption is 1 watt maximum.
Services
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
HP X121 1G SFP RJ45 T
Transceiver (J8177C)
A small form-factor
pluggable (SFP) Gigabit
copper transceiver that
provides a full-duplex
Ports
1 RJ-45 1000BASE-T port (IEEE 802.3ab Type 1000BASE-T); Duplex: full
only
Physical characteristics
Dimensions: 0.54(w) x 2.71(d) x 0.55(h) in (1.37 x 6.88 x 1.4 cm)
Weight: 0.06 lb (0.03 kg)
Environment
Operating temperature: 32°F to 158°F (0°C to 70°C); with 100 LFM airflow
over the SFP module
Operating relative humidity: 0% to 95% @ 75°F (25°C), noncondensing