HP EliteBook 840 G2 Notebook PC HP EliteBook 740 G2 Notebook PC HP ZBook 14 G2 Mobile Workstation - Maintenance and Service Guide

Hard drive
NOTE: The hard drive spare part kit does not include the hard drive bracket or screws. The hard drive
bracket and screws are included in the Hard Drive Hardware Kit, spare part number 730793-001.
Description Spare part number
1-TB, 7200-rpm, SATA, 9.5-mm hard drive for use on all computer models 766644-001
500-GB, 7200-rpm, SATA, 7.0-mm hard drive for use on all computer models 703268-001
500-GB, 7200-rpm, SED, 7.0-mm hard drive for use on all computer models 703267-001
500-GB, 5400-rpm, SATA, FIPS, 7.0-mm hard drive for use on all computer models 812618-001
500-GB, 7200-rpm, SATA, Seagate, locked, 7.0-mm hard drive for use on all computer models 817186-001
500-GB, 7200-rpm, Seagate, locked, hard drive for use only on HP ZBook 14 G2 Mobile Workstation
computer models
828637-001
500-GB, 5400-rpm, Hybrid 8.0-GB, Seagate, locked 7.0-mm hard drive for use only on HP EliteBook 840
G2 Notebook PC and HP EliteBook 740 G2 Notebook PC computer models
732000-001
500-GB, 5400-rpm, Hybrid 8.0-GB, Seagate, locked 7.0-mm hard drive for use only on HP EliteBook 840
G2 Notebook PC and HP EliteBook 740 G2 Notebook PC computer models
827055-001
Before removing the hard drive, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the service cover (see Service cover on page 57).
5. Remove the battery (see Battery on page 59).
Remove the hard drive:
1. Loosen the 4 hard drive retention screws (1).
2. Release the hard drive (2) by sliding it forward.
60 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts ENWW