HP EliteBook 840 G2 Notebook PC HP EliteBook 740 G2 Notebook PC HP ZBook 14 G2 Mobile Workstation - Maintenance and Service Guide

1. Remove the Phillips PM2.0×3.0 screw (1) that secures the solid-state drive to the system board. (The
solid-state drive tilts up.)
2. Remove the solid-state drive (3) by pulling the drive away from the slot at an angle.
NOTE: Solid-state drives are designed with a notch to prevent incorrect insertion.
Reverse this procedure to install the solid-state drive.
ENWW Component replacement procedures 63