HP 15 Notebook PC - Maintenance and Service Guide

Memory module
Description Spare part number
8 GB memory module (PC3, 12800, 1600-MHz) 693374-001
4 GB memory module (PC3, 12800, 1600-MHz) 691740-001
2 GB memory module (PC3, 12800, 1600-MHz) 691739-001
Before removing a memory module, follow these steps:
1. Turn o the computer. If you are unsure whether the computer is o or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see Battery on page 28).
5. Remove the service door (see Service door on page 29).
Remove the memory module:
NOTE: Note the location of the memory module. If you are replacing it, install the new memory module in
the same slot.
1. Spread the two retaining tabs (1) on each side of the memory module slot to release
the memory module. (The memory module tilts up.)
2. Remove the memory module (2) by pulling it away from the slot at a 45 degree angle.
Reverse this procedure to install the memory module.
30 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts