Administrator's Guide

Manage Services
Items on the Manage Services page are described in the following table.
1. Select one or more services for your service template. To select a listed service, click the check
box for the service.
2. To create and add a custom service to the list, click Manage Custom Services.
3. After the desired services are selected, click OK.
Table 5-5 Manage Services page
Item Description
Custom Services List of user-defined custom services.
Common Printer/MFP Services List of common printer/MFP services supported by the print server.
Manage Custom Services Click to create and manage user-defined services.
Manage Custom Services
Use this page to add or remove custom services to the Manage Services page. To add a custom
service, use the following steps:
1. Enter a name for the custom service.
2. Specify the Protocol, Service Type, and Service Port or ICMP Message Type for this custom
service.
3. Click Add to add the service to the Configured Custom Services list.
4. Click OK to save your changes. Or, click Cancel to discard your changes.
Table 5-6 Manage Custom Services page
Item Description
Name Name for the custom service.
NOTE: The custom service name must be unique.
Protocol Protocol for this custom service. The default protocol is TCP. Other selections include
UDP, ICMPv4/v6, and IGMPv2.
●
For TCP or UDP, specify the local Printer/MFP ports and remote host ports for
the service.
● For ICMPv4 or ICMPv6, specify an ICMP message type for the service. ICMP
message types are based on standards and are well known.
● For IGMPv2, local/remote ports or ICMP message types are not configured. All
IGMP messages types are assumed.
Service Type Service type:
● Printer/MFP Service (default): Local service on the HP Jetdirect print server or
device.
●
Remote Service: Service on a remote host.
112 Chapter 5 IPsec/Firewall configuration (V.45.xx.nn.xx) ENWW