Administrator's Guide

Table 5-6 Manage Custom Services page (continued)
Item Description
Service Port For TCP or UDP, select the ports for this custom service to use on the local printer/
MFP, and the remote hosts. The default selection is Any Port.
Depending on the service, select Port Range or Specific Port, then enter the port
range or port in the fields provided.
ICMP Message Type For ICMPv4 or ICMPv6, enter the ICMP message type number to use by the service.
ICMP does not use ports. Instead, it uses well-known message types.
NOTE: ICMP messages are typically used for error, control or information
messages between network hosts.
Add Add the custom service to the Configured Custom Services list.
Configured Custom Services Custom services that were configured.
Delete Select the service to delete and click Delete. You cannot delete a custom service that
is specified for use by an active service template.
Step 3: Specify Action
Select an action for the print server for the addresses and services specified for this rule. Available
actions depend on whether IPsec is supported.
●
Allow traffic. If IPsec is supported, allow traffic to pass without IPsec protection.
●
Drop traffic. Do not process (discard) the specified IP traffic.
●
Require traffic to be protected with an IPsec/Firewall policy. If IPsec/Firewall features are
supported, you are prompted to select or configure an IPsec template to be applied to the
specified IP traffic.
Specify IPsec/Firewall Template
Any prior IPsec templates (for example, for other rules) are listed in the IPsec/Firewall Templates
field. Because IPsec templates are network dependent, predefined factory default templates are not
supplied.
●
If the list is empty, the Create IPsec Template page appears instead, so that you can create a
template.
●
If a desired IPsec template is not in the list, click New to create a custom template using the
Create IPsec Template page.
To view or delete a listed template, select it and click View or Delete as appropriate.
After an IPsec template is added to the list and selected, click Next to complete the rule.
ENWW HP Jetdirect IPsec/Firewall wizard 113