Administrator's Guide

Table 5-8 Identity Authentication page
Item Description
Pre-Shared Key Select the Identity Type. Choose from Distinguished Name, FQDN, E-mail, Key-
ID, or IP Address.
Enter the Identity for the identity type that you selected.
Indicate whether the Identity is ASCII or Hex.
Enter a pre-shared key (ASCII string) in the Key field. This pre-shared key is shared
by all hosts specified by this rule. If used, it should be protected. Any host that knows
this key can be authenticated.
Certificates Use certificates for authentication. A self-signed HP Jetdirect certificate is pre-
installed by factory default, which you can replace. In addition, you must install a CA
certificate for server authentication.
●
Status Indicates whether a certificate is installed.
● View Display the certificate data of an installed certificate..
●
Configure Manage or install a certificate.
For information on requesting, configuring and installing certificates, see
Configure
certificates on page 94.
Kerberos Use Kerberos authentication.
The status is displayed (Configured or Not Configured).
To view data for a configured authentication, click View. To configure a new
authentication, click Configure.
Kerberos
You can configure the HP Jetdirect print server for Kerberos authentication manually, or by importing
configuration files. Items on the Kerberos page are described in the following table.
ENWW HP Jetdirect IPsec/Firewall wizard 115