Administrator's Guide

Disable an HP Jetdirect embedded print server (V.

45.xx.nn.xx)

NOTE: You can disable HP Jetdirect EIO and external print servers by disconnecting them from the

printer/MFP.

You can disable an HP Jetdirect embedded print server by using the printer/MFP Service menu. This

can help you isolate faults to either the printer or the print server. To disable the print server, use the

following steps:

1. Turn the printer on and watch for the memory count to begin.

Press and hold the Select



button (or the 6 button on MFPs with numeric keypads) until the

three control panel lights (Ready, Data, Attention) blink and then remain on.

Release the Select



button (or 6 button). The control panel displays Select.

4. Press the down arrow

button (or 9 button) until Embedded LAN disable appears.

Press the Select



button (or 6 button) to disable the embedded print server and then continue

its turn-on sequence.

6. Verify whether the printer/MFP properly completes its turn-on sequence.

To enable the embedded print server, use the same instructions except select Embedded LAN

enable in step 4.

128 Chapter 7 Troubleshoot the HP Jetdirect print server ENWW