Administrator's Guide

Table 8-4 Security Settings (continued)
Message Description
IPsec
or
Firewall
If the print server and printer/MFP device supports IPsec, then IPsec appears. If
IPsec is not supported, then Firewall appears.
Current IPsec/Firewall status.
Enabled IPsec/Firewall is enabled and operating as configured.
Disabled IPsec/Firewall is turned off.
Policy Failed Print server failed to implement the selected IPsec policy. You might
need to reset security (control panel or the HP Embedded Web Server), or perform a
cold reset.
Admin Password IP Administrator password is set on the print server. This password is shared by
Telnet, the HP Embedded Web Server, and HP Web Jetadmin to control access to
print server configuration parameters. (Consists of up to 16 alphanumeric characters.)
Not Specified Password not set.
Set Password is set.
Clear the password, using a cold reset.
Cert Expires Expiration date of the digital certificate for SSL/TLS encrypted security. The date is in
UTC format (for example, “2012-10-02 12:45 UTC”).
Not Applicable Digital certificate is not installed.
SNMP Versions SNMP versions enabled on the print server.
Disabled All SNMP versions disabled. No SNMP access is allowed.
1;2 SNMP v.1 and SNMP v.2c supported. SNMP v.3 is disabled, or not supported.
1;2;3-na/np SNMP v.1, v.2c, and v.3 enabled. v.3 is enabled with the minimum
security of no authentication (na) and no privacy (np).
1;2;3-a/np SNMP v.1, v.2c, and v.3 enabled. v.3 is enabled with the minimum security
of authentication enabled (a) but no privacy (np).
1;2;3-a/p SNMP v.1, v.2c, and v.3 enabled. v.3 is enabled with the minimum security
of authentication (a) with privacy (p) enabled.
3-na/np SNMP v.1 and v.2c disabled. SNMP v.3 is enabled with the minimum security
of no authentication (na) and no privacy (np).
3-a/np SNMP v.1 and v.2c disabled. SNMP v.3 is enabled with the minimum security
of authentication enabled (a) but no privacy (np).
3-a/p SNMP v.1 and v.2c disabled. SNMP v.3 is enabled with the minimum security of
authentication (a) with privacy (p) enabled.
SNMP Set Cmty Name SNMP set community name is configured on the HP Jetdirect print server. An SNMP
set community name is a password for write access to SNMP control functions
(SNMP SetRequests) on the HP Jetdirect print server.
Not Specified SNMP set community name is not set.
Specified User-specified SNMP set community is set.
SNMP Get Cmty Name SNMP get community name is configured on the HP Jetdirect print server. This is a
password to determine which SNMP GetRequests the HP Jetdirect print server
responds to. If a Get community name is set, the print server responds to either a
user specified community name or the factory-default.
ENWW HP Jetdirect configuration page 145