Administrator's Guide

Novell/NetWare parameters
Information in this section of the HP Jetdirect configuration page is described in Table 8-10 Novell/
NetWare configuration information on page 151. For error messages, see Table 8-13 Error
messages on page 153.
Table 8-10 Novell/NetWare configuration information
Message Description
STATUS Current Novell NetWare configuration status.
READY Print server is awaiting data.
DISABLED Manually disabled.
INITIALIZING Registering the node address or name. Additional status messages
might be displayed.
An error code and message is displayed if the print server is not ready. For more
information, see
Table 8-13 Error messages on page 153.
NODE NAME Queue Server Mode Print server name, which must match a valid print server on the
appropriate NetWare file server. The default name is NPIXXXXXX, where XXXXXX is
the last six digits of the LAN hardware (MAC) address.
Remote Printer Mode Network printer name. The default name is NPIXXXXXX.
NETWARE MODE Mode used by the HP Jetdirect print server.
QUEUE SERVER Receives data directly from the queue.
REMOTE PRINTER Print server emulates a Novell NetWare remote printer. (The
printer number normally follows this parameter.)
If the printer is not configured, this field displays QUEUE SERVER.
NDS TREE NAME Name of the Novell Directory Services (NDS) tree for this printer. NDS is a database
of objects on a NetWare network organized in a hierarchical tree structure.
Not Specified (or blank) NDS is disabled.
NDS CONTEXT Fully qualified NDS name where the HP Jetdirect print server object resides in the
NDS tree. For example:
CN=lj_pserver.OU=support.OU=mycity.OU=mycompany
Not Specified (or blank) NDS is disabled.
ATTACHED SERVER HP Jetdirect discovery method [NSQ] (Nearest Service Query) or [GSQ] (General
Service Query) and the name of the proxy file server used to locate the configured
bindery servers.
Not Specified (or blank) A NetWare server is not configured.
SAP INTERVAL Time interval in seconds that the print server waits between SAP broadcasts on the
network. The default is 60 seconds.
AppleTalk protocol information
Information in this section of the HP Jetdirect configuration page (Ethernet only) is described in Table
8-11 AppleTalk configuration information on page 152. For error messages, see Table 8-13 Error
messages on page 153.
ENWW HP Jetdirect configuration page 151