Administrator's Guide

Table 8-11 AppleTalk configuration information
Message Description
STATUS Current AppleTalk configuration status.
READY Print server is awaiting data.
DISABLED Manually disabled.
INITIALIZING Registering the node address or name. Additional status messages
might be displayed.
An error code and message is displayed if the print server is not ready. For more
information, see
Table 8-13 Error messages on page 153.
NAME Printer name on the AppleTalk network. A number after the name signifies this is the
Nth instance of this name.
ZONE Name of the AppleTalk network zone on which the printer is located.
TYPE Printer type advertised on the network. Two types can display.
NETWORK NUMBER
NODE NUMBER
NETWORK NUMBER Network number on which the HP Jetdirect print server is
currently operating.
NODE NUMBER Node number that the print server chose for itself as part of its
initialization sequence.
NOTE: The AppleTalk phase 2 (P2) parameter is pre-configured on the HP Jetdirect
print server.
DLC/LLC protocol information
Information in this section of the HP Jetdirect configuration page is described in Table 8-12 DLC/LLC
configuration information on page 152.
Table 8-12 DLC/LLC configuration information
Message Description
STATUS: Current DLC/LLC protocol status.
READY Print server is awaiting data.
DISABLED Manually disabled.
INITIALIZING Registering the node address or name. Additional status messages
might display.
An error code and message is displayed if the print server is not ready. For more
information, see
Table 8-13 Error messages on page 153.
Error messages
Error codes and messages that might appear in the Status sections of the HP Jetdirect configuration
page are described in
Table 8-13 Error messages on page 153.
152 Chapter 8 HP Jetdirect configuration pages ENWW