Administrator's Guide

Table C-1 HP Jetdirect EIO Menu on Graphical Control Panel (continued)
Menu item Sub-menu item Sub-menu item Values and Description
AppleTalk Enable Off: Disable the AppleTalk protocol.
On: Enable the AppleTalk protocol.
NOTE: The factory default setting depends on the
print server model.
DLC/LLC Enable Off: Disable the DLC/LLC protocol.
On: Enable the DLC/LLC protocol.
NOTE: The factory default setting depends on the
print server model.
Security Print Sec Page Yes: Print the current IPsec security settings.
No (default): Do not print the current settings..
NOTE: Displays only if IPsec is supported on the
print server.
Secure Web Require encrypted communication between a browser
and the HP Embedded Web Server.
HTTPS Required: Only HTTPS access is accepted.
The print server appears as a secure site.
HTTP/HTTPS Optional: Access using either HTTP or
HTTPS.
NOTE: The factory default setting depends on the
print server model.
IPsec or Firewall Specify the IPsec or Firewall status on the print
server.
Keep: Retain IPsec/Firewall configuration.
Disable: Disable IPsec/Firewall operation on the print
server.
NOTE: Displays IPsec if the print server supports
both IPsec and Firewall. Displays Firewall if the print
server does not support IPsec..
Reset Security Reset security settings on the print server to factory
defaults.
No (default): Retain current security settings.
Yes: Reset security settings to factory defaults.
802.1X Reset 802.1X settings on the print server to factory
defaults.
No (default): Retain current 802.1X settings.
Yes: Reset 802.1X settings to factory defaults.
184 Appendix C HP Jetdirect control panel menus (V.45.xx.nn.xx) ENWW