Administrator's Guide

Table 3-3 Telnet Commands and Parameters (continued)
status-page-lang
Printer job language (PJL) that the print server uses to send the HP Jetdirect
configuration/status page to the printer.
●
Auto (default): PJL is auto-detected when the print server is turned on or after a
cold reset.
●
PCL: HP Printer Control Language
● ASCII: Standard ASCII characters
● HPGL2: HP graphics language (v2)
●
PS: Postscript language
Support
Web JetAdmin URL
(Read-only parameter.) If HP Web Jetadmin discovers this device, the URL to access
HP Web Jetadmin is specified.
Web JetAdmin Name
(Read-only parameter.) If HP Web Jetadmin discovers this device, the name of the
HP Web Jetadmin host is specified (if known).
support-contact
Name of a person to contact for support of this device.
support-number
Phone or extension number to call for support of this device.
support-url
Web URL address for product information on this device over the Internet or an intranet.
tech-support-url
Web URL address for technical support over the Internet or an intranet.
Menu Interface
An optional Menu interface is displayed when you type the menu command during a Telnet session
with the HP Jetdirect print server. The Menu interface provides structured menu lists for easy access
to configuration parameters.
Figure 3-1 Example: Using the Menu Interface on page 60 illustrates the Menu interface, using the
TCP/IP menus as an example.
● From the Main Menu screen, select and enter a menu number. If there are submenus, select
and enter a submenu number.
●
To change a setting, enter Y (for Yes) when prompted.
Edit the setting, using the Backspace key. If you enter an unrecognized value, the correct entry
options are displayed.
NOTE: Changes are not saved on the HP Jetdirect print server until you exit a menu and choose to
save your changes.
ENWW IPv4 configuration 59