Administrator's Guide

Other Settings
Use this tab to provide access to a variety of management and printing configuration options. The
following tabs are discussed:
●
Misc. Settings on page 85 Enable miscellaneous advanced protocols and functions
●
Firmware Upgrade on page 87 Update your HP Jetdirect print server with new features and
enhancements
●
LPD Queues on page 87 Set up print queues used in printing with line printer daemon (LPD)
printing services
●
Support Info on page 90 Set up the Support link located under Other Links in the left margin
●
Refresh Rate on page 90 Set the time interval (in seconds) for HP Embedded Web Server
diagnostic page updates
Misc. Settings
Use the Misc. Settings tab to set a variety of advanced protocols and features, as described in Table
4-13 Miscellaneous Settings on page 85.
Table 4-13 Miscellaneous Settings
Item Description
SLP Config Enable SLP, which is used by certain client application software to automatically
discover and identify the HP Jetdirect print server.
If SLP uses multicast protocols, you must enable Multicast IPv4.
Telnet Config Use Telnet to access to HP Jetdirect configuration parameters. For more information,
see
TCP/IP configuration on page 15.
Bonjour Use Bonjour services (formerly listed as Multicast Domain Name System [mDNS]
services). Bonjour is typically used for IP address and name resolution (through UDP
port 5353) where a conventional DNS server is not used.
For Bonjour operation, you must enable Multicast IPv4.
Multicast IPv4 Use the receipt and transmission of IP version 4 multicast packets by the print server.
NOTE: If disabled, other protocols that use multicast protocols, such as Bonjour and
SLP, might also be disabled.
9100 Config Use port 9100 services. This is an HP-proprietary raw TCP/IP port on the HP Jetdirect
print server and is the default port for printing. It is accessed by HP software, such as
the HP Standard Port.
FTP Printing Use FTP services available on the HP Jetdirect print server for printing. For more
information, see
FTP printing on page 175.
LPD Printing Use LPD services on the HP Jetdirect print server. LPD provides line printer spooling
services for TCP/IP systems. For more information, see
LPD printing on page 165.
IPP Printing Use IPP on the HP Jetdirect print server. If the printer is properly connected and
accessible, IPP allows printing to this device over the Internet (or intranet). A properly
configured IPP client system is also required. For information on IPP client software, see
HP software solutions summary on page 7.
HP XML Services Allow access by HP Web service applications to XML-based data on the HP Jetdirect
print server.
ENWW Networking tab 85