Setup and Install

2 Install the HP Jetdirect 640n Print
Server
This chapter contains instructions to install the print server hardware, and then to use the
HP Jetdirect installation software to install the printer/MFP device on a Windows system.
●
Verify Printer/MFP Operation
●
Install the print server
●
Verify Print Server Operation
●
If Required, Pre-configure HP Jetdirect with Network Settings
●
Add the Printer to Your Network System
Verify Printer/MFP Operation
To verify that your printer/MFP is working properly, print a Printer Configuration page. The Printer
Configuration page will display the operating status of the printer/MFP.
The steps to print a Printer Configuration page varies with each printer/MFP model. For most printers/
MFPs with a control panel, a menu map is provided to navigate the control panel menus. To print a
Printer Configuration page, use the menu map or see your printer/MFP documentation for specific
instructions.
NOTE: The name of the Printer Configuration page may vary by printer type.
Install the print server
Use the following steps to install the HP Jetdirect 640n Print Server.
ENWW Verify Printer/MFP Operation 7