Setup and Install

4 Troubleshooting
This section contains information on the following topics:
●
HP Jetdirect Configuration Page
●
LEDs
●
Resetting to Factory Defaults
●
Controlling Network Protocols
HP Jetdirect Configuration Page
The HP Jetdirect Configuration page provides comprehensive print server status. It is an important
diagnostic tool, especially if network communications with the print server is not available.
In most HP LaserJet printers/MFPs, an HP Jetdirect Configuration page will automatically print when
you print a Printer Configuration page. Refer to your printer/MFP documentation for instructions to
print configuration pages.
For a description of messages that may appear on the HP Jetdirect Configuration Page, see the
HP Jetdirect Print Servers Administrator’s Guide for your print server model.
LEDs
The HP Jetdirect 695n Print Server contains the following status lights (LEDs) that indicate the
wireless status, the network connection speed, link status, and network activity.
Table 4-1 HP Jetdirect LEDs
LED Color Description
Wireless
Connection Status
Blue Slow Blink — Scanning (blink is approximately once per second).
Blinking — Connected to network (rate depends on data rate).
Constant — No data transfer.
1000
100
10
Green Indicates the link speed, either at 1000 Mbps, 100 Mbps, or 10 Mbps.
Link Green When on, indicates that the print server has successfully linked to the network.
Act Yellow When blinking, indicates network transmission activity.
ENWW HP Jetdirect Configuration Page 17