Setup and Install

Table A-1 HP Jetdirect EIO Menu on Graphical Control Panel (continued)
Menu item Sub-menu item Sub-menu item Values and Description
IPX/SPX Enable Off (default): Disable the IPX/SPX protocol.
On: Enable the IPX/SPX protocol.
Frame Type Selects the frame-type setting for your network.
Auto: Automatically sets and limits the frame type to
the first one detected.
EN_8023, EN_II, EN_8022, and EN_SNAP: Frame-
type selections for Ethernet networks
AppleTalk Enable Off (default): Disable the AppleTalk protocol.
On: Enable the AppleTalk protocol.
DLC/LLC Enable Off (default): Disable the DLC/LLC protocol.
On: Enable the DLC/LLC protocol.
Security Print Sec Page Yes: Prints a page that contains the current IPsec
security settings on the HP Jetdirect print server.
No (default): A security settings page is not printed.
Secure Web For configuration management, specify whether the
embedded Web server will accept communications
using HTTPS (Secure HTTP) only, or both HTTP and
HTTPS.
HTTPS Required: For secure, encrypted
communications, only HTTPS access is accepted.
The print server will appear as a secure site.
HTTP/HTTPS optional: Access using either HTTP or
HTTPS is permitted.
NOTE: The factory default setting depends on the
print server model.
IPSEC or Firewall NOTE: IPSEC will appear on the menu for both
IPsec and Firewall status.
Specify the IPsec or Firewall status on the print
server.
Keep: IPsec/Firewall status remains the same as
currently configured.
Disable: IPsec/Firewall operation on the print server
is disabled.
Reset Security Specify whether the current security settings on the
print server will be saved or reset to factory defaults.
No (default): The current security settings are
maintained.
Yes: Security settings are reset to factory defaults.
26 Appendix A HP Jetdirect EIO Control Panel Menus ENWW