Administrator's Guide

Table C-1 HP Jetdirect EIO Menu on Graphical Control Panel (continued)
Menu item Sub-menu item Sub-menu item Values and Description
IPsec or Firewall Specify the IPsec or Firewall status on the print server.
Keep: Retain IPsec/Firewall configuration.
Disable: Disable IPsec/Firewall operation on the print
server.
NOTE: Displays IPsec if the print server supports
both IPsec and Firewall. Displays Firewall if the print
server does not support IPsec..
Reset Security Reset security settings on the print server to factory
defaults.
No (default): Retain current security settings.
Yes: Reset security settings to factory defaults.
802.1X Reset 802.1X settings on the print server to factory
defaults.
No (default): Retain current 802.1X settings.
Yes: Reset 802.1X settings to factory defaults.
Code Verification Yes (default): Perform verification of the integrity and
authenticity of the encrypted firmware upgrade image
before installation. If an error is detected by the
download manager, the configuration page displays a
code verification error.
No: Do not perform verification of the firmware
upgrade image.
Enable Wipe Most configuration settings are erased during a cold
reset. However, you can indicate whether to also
erase stored digital certificates.
Yes: Erase all stored digital certificates during a cold
reset.
No (default): Do not erase stored digital certificates
during a cold reset.
Login Security Keep
Reset
Assessment Keep
Disable
Graphical control panel menus
181