Administrator's Guide

CAUTION: If you are using direct-mode printing over IPX/SPX on a Microsoft network, do not
disable IPX/SPX.
For a Novell NetWare network:
●
Use the HP Embedded Web Server to select Queue Server Mode parameters in a Novell Directory
Services (NDS) environment.
●
Do not use the HP Embedded Web Server to create the NDS print server, printer, and queue
objects. Instead, use another tool or utility.
Table 4-10 IPX/SPX tab settings
Item Description
IPX/SPX Enable
Select the check box to use IPX/SPX protocols.
IPX/SPX Frame Type
IPX/SPX frame type to use on your network. After a frame type is configured, all others are
counted and discarded.
●
All Frame Types (Auto) Sense all types and configure the first one detected (default).
●
Ethernet 802.3 (EN_8023) Use IPX over IEEE 802.3 frames.
●
Ethernet II (EN_II) Use IPX over Ethernet frames.
● Ethernet 802.2 (EN_8022) Use IPX over IEEE 802.2 with IEEE 802.3 frames.
●
Ethernet SNAP (EN_SNAP) Use IPX over SNAP with IEEE 802.3 frames.
SAP Interval
Time interval (in seconds) that the HP Jetdirect print server waits to send SAP messages, which
are broadcast to advertise its service capabilities on a Novell NetWare network. The default is
60 seconds. Enter zero (0) to disable.
Print Server Name
NetWare printer name for the HP Jetdirect print server. The default name is NPIxxxxxx, where
xxxxxx are the last six digits of the HP Jetdirect print server's LAN hardware (MAC) address.
NDS Tree Name
Name of the NDS tree for this device. Refers to the name of the organizational tree used by
your network. To disable NDS support, leave the field blank.
NDS Context
NDS container or organizational unit that contains the print server object. Print queue and
device objects can be located anywhere within the NDS tree, but the HP Jetdirect print server
must be configured with the fully qualified print server object name.
For example, if the print server object is found in the container “marketing.mytown.lj”, the fully
qualified print server context name (CN) is:
“OU=marketing.OU=mytown.O=lj”
In the example, OU is an organization unit container and O is an organization container
within the NDS tree. The print server also accepts “marketing.mytown.lj”.
To disable NDS support, leave the field blank.
NOTE: You cannot create NDS objects using the HP Embedded Web Server.
82 Chapter 4 HP Embedded Web Server (V.40.xx)