Datasheet

6
HP 5500 EI TAA-compliant Switch Series
Specifications
HP 5500-24G EI TAA-compliant Switch with 2
Interface Slots (JG250A)
HP 5500-48G EI TAA-compliant Switch with 2
Interface Slots (JG251A)
HP 5500-48G-PoE+ EI TAA-compliant Switch with 2
Slots (JG253A)
Ports
24 RJ-45 autosensing 10/100/1000 ports (IEEE
802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX, IEEE 802.3ab Type 1000BASE-T);
Media Type: Auto-MDIX; Duplex:
10BASE-T/100BASE-TX: half or full; 1000BASE-T:
full only
4 dual-personality ports; autosensing
10/100/1000BASE-T or SFP
2 port expansion module slots
1 RJ-45 serial console port
Supports a maximum of 24 autosensing
10/100/1000 ports
48 RJ-45 autosensing 10/100/1000 ports (IEEE
802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX, IEEE 802.3ab Type 1000BASE-T);
Media Type: Auto-MDIX; Duplex:
10BASE-T/100BASE-TX: half or full; 1000BASE-T:
full only
4 dual-personality ports; autosensing
10/100/1000BASE-T or SFP
2 port expansion module slots
1 RJ-45 serial console port
Supports a maximum of 48 autosensing
10/100/1000 ports
48 RJ-45 autosensing 10/100/1000 PoE+ ports
(IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE
802.3at PoE+); Media Type: Auto-MDIX; Duplex:
10BASE-T/100BASE-TX: half or full; 1000BASE-T:
full only
4 dual-personality ports; autosensing
10/100/1000BASE-T or SFP
2 port expansion module slots
1 RJ-45 serial console port
Supports a maximum of 48 autosensing
10/100/1000 ports
Physical characteristics
17.32(w) x 11.81(d) x 1.72(h) in (43.99 x 30 x
4.37 cm) (1U height)
17.32(w) x 11.81(d) x 1.72(h) in (43.99 x 30 x
4.37 cm) (1U height)
17.32(w) x 16.54(d) x 1.72(h) in (43.99 x 42.01 x
4.37 cm) (1U height)
Weight
8.82 lb (4 kg) 9.92 lb (4.5 kg) 14.33 lb (6.5 kg)
Memory and processor
256 MB SDRAM, 32 MB flash; packet buffer size: 2
MB
256 MB SDRAM, 32 MB flash; packet buffer size: 4
MB
256 MB SDRAM, 32 MB flash; packet buffer size: 4
MB
Mounting
Mounts in an EIA-standard 19 in. telco rack or
equipment cabinet (hardware included)
Mounts in an EIA-standard 19 in. telco rack or
equipment cabinet (hardware included)
Mounts in an EIA-standard 19 in. telco rack or
equipment cabinet (hardware included)
Performance
1000 Mb Latency
< 3.2 µs < 3.2 µs < 3.2 µs
10 Gbps Latency
< 2.6 µs < 2.6 µs < 2.6 µs
Throughput
107.2 million pps 142.9 million pps 142.9 million pps
Routing/Switching capacity
144 Gbps 192 Gbps 192 Gbps
Routing table size
12000 entries 12000 entries 12000 entries
Environment
Operating temperature
32°F to 113°F (0°C to 45°C) 32°F to 113°F (0°C to 45°C) 32°F to 113°F (0°C to 45°C)
Operating relative humidity
10% to 90%, noncondensing 10% to 90%, noncondensing 10% to 90%, noncondensing
Nonoperating/Storage temperature
-40°F to 158°F (-40°C to 70°C) -40°F to 158°F (-40°C to 70°C) -40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage relative humidity
5% to 95%, noncondensing 5% to 95%, noncondensing 5% to 95%, noncondensing
Electrical characteristics
Maximum heat dissipation
375 BTU/hr (395.63 kJ/hr) 392 BTU/hr (413.56 kJ/hr) 921 BTU/hr (971.66 kJ/hr)
Voltage
100-240 VAC 100-240 VAC 100-240 VAC
DC voltage
-52 to -55 VDC
Maximum power rating
110 W 115 W 910 W
PoE power
740 W
Frequency
50/60 Hz 50/60 Hz 50/60 Hz
Notes
Maximum power rating and maximum heat
dissipation are the worst-case theoretical maximum
numbers provided for planning the infrastructure
with fully loaded PoE (if equipped), 100% traffic, all
ports plugged in, and all modules populated.
Maximum power rating and maximum heat
dissipation are the worst-case theoretical maximum
numbers provided for planning the infrastructure
with fully loaded PoE (if equipped), 100% traffic, all
ports plugged in, and all modules populated.
Maximum power rating and maximum heat
dissipation are the worst-case theoretical maximum
numbers provided for planning the infrastructure
with fully loaded PoE (if equipped), 100% traffic, all
ports plugged in, and all modules populated.
PoE power is the power supplied by the internal
power supply. It is dependent on the type and
quantity of power supplies and may be
supplemented with the use of an external power
supply (EPS).
With AC input, the maximum power consumption is
640 W; PoE is 370 W.
Safety
UL 60950-1; EN 60825-1 Safety of Laser
Products-Part 1; EN 60825-2 Safety of Laser
Products-Part 2; IEC 60950-1; CAN/CSA-C22.2
No. 60950-1; EN 60950-1/A11; FDA 21 CFR
Subchapter J; ROHS Compliance
UL 60950-1; EN 60825-1 Safety of Laser
Products-Part 1; EN 60825-2 Safety of Laser
Products-Part 2; IEC 60950-1; CAN/CSA-C22.2
No. 60950-1; EN 60950-1/A11; FDA 21 CFR
Subchapter J; ROHS Compliance
UL 60950-1; EN 60825-1 Safety of Laser
Products-Part 1; EN 60825-2 Safety of Laser
Products-Part 2; IEC 60950-1; CAN/CSA-C22.2
No. 60950-1; EN 60950-1/A11; FDA 21 CFR
Subchapter J; ROHS Compliance