Product Data Sheet / Brochure

3 - SIC module slots / 1 DSIC
1 USB 2.0 Port for 3G modem and USB disk
1 CON/AUX port and 1 USB console port
0 - VCPM slots
0 - VPM slot
1GB DDR3 SDRAM included (default=1GB \ max=1GB DDR SDRAM)
AC Power Supply included
1U - Height
Note:1, 2, 3, 4
PDU CABLE NA/MEX/TW/JP JG411A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU CABLE ROW JG411A#B2C
C15 PDU Jumper Cord (ROW)
High Volt Switch to Wall Power Cord JG411A#B2E
NEMA L6-20P Cord (NA/MEX/JP/TW)
Configuration Rules:
Note 1 If this Switch is selected integrated to the CTO Switch Solution, Then a Minimum of 1 factory integrated accessory
must be ordered and integrated to CTO chassis. See Menu below, option must have a #0D1 to be integrated to the
CTO Chassis.
Note 2 Localization required on orders without #B2B, #B2C or #B2E options.
Note 3 #B2E is Offered only in NA, Mexico,, Taiwan, and Japan.
Note 4 If the Router Chassis is to be Box Level Factory Integrated (CTO), Then the #0D1 is required on the Router Chassis
and integrated to the JG500A - HP MSR CTO Enablement. (Min 1/Max 1 Router per SSP)
Remarks:
Drop down under power supply should offer the following options and results:
Switch/Router/Power Supply to PDU Power Cord - #B2B in North America, Mexico, Taiwan, and Japan or #B2C ROW.
(Watson Default B2B or B2C for Rack Level CTO)
Switch/Router/Power Supply to Wall Power Cord - Localized Option (Watson Default for BTO and Box Level CTO)
High Volt Switch/Router/Power Supply to Wall Power Cord - #B2E Option. (Offered only in North America, Mexico,
Taiwan, and Japan)
Internal Power Supplies
Internal Power Supplies included
Enter the following menu selections as integrated to the CTO Model X server above if order is factory built.
SIC Modules
QuickSpecs
HP MSR2000 Series
Configuration
DA - 14642 Worldwide — Version 8 — February 10, 2014 Page 9