Specification Sheet
DATA SHEET
ARUBA 3810 SWITCH SERIES
- Classier-based rate limiting uses an access control list
(ACL) to enforce increased bandwidth for ingress trac
on each port
- Reduced bandwidth provides per-port, per-queue
egress-based reduced bandwidth
• Remote intelligent mirroring mirrors selected ingress/egress
trac based on an ACL, port, MAC address, or VLAN to a
local or remote HPE 8200 zl, 6600, 6200 yl, 5400 zl, 5400R,
or 3500 Switch anywhere on the network
• Remote monitoring (RMON), Extended RMON (XRMON),
and sFlow
®
v5 provide advanced monitoring and reporting
capabilities for statistics, history, alarms, and events
• Trac prioritization allows real-time trac classication
into eight priority levels that are mapped to eight queues
Management
• NEW Aruba Central support Cloud based management
platform oers simple, secure, and cost eective way to
manage switches
• Friendly port names allows assignment of descriptive
names to ports
• IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
advertises and receives management information from
adjacent devices on a network, facilitating easy mapping
by network management applications
• Command authorization leverages RADIUS to link a
custom list of CLI commands to an individual network
administrator’s login; an audit trail documents activity
• Multiple conguration les stores easily to the ash image
• Dual ash images provides independent primary and
secondary operating system les for backup while upgrading
• Out-of-band Ethernet management port enables
management over a separate physical management
network; and keeps management trac segmented from
network data trac
• Comware CLI
- Comware-compatible CLI bridges the experience of
Hewlett Packard Enterprise (HPE) Comware CLI users
who are using the ArubaOS-Switch CLI
- Display and fundamental Comware CLI commands are
natively embedded in the switch CLI; display output is
formatted as on Comware-based switches; fundamental
commands provide Comware-familiar initial switch setup
- Conguration Comware CLI commands when Comware
commands are entered, CLI help is elicited to formulate
the correct ArubaOS-Switch software CLI command
• Zero-Touch Provisioning (ZTP) simplied installation of the
switch infrastructure using Aruba Activate-based or DHCP-
based process with AirWave Network Management
• Unidirectional Link Detection (UDLD) supports HPE UDLD
and DLDP protocols to monitor a cable between two
switches and shut down the ports on both ends if a broken
link is detected, preventing network problems such as loops
• NEW IP SLA for Voice Monitor quality of voice trac with
UDP Jitter and UDP Jitter for VoIP tests
Connectivity
• Jumbo frames on Gigabit Ethernet and 10-Gigabit Ethernet
ports, jumbo frames allow high-performance remote
backup and disaster-recovery services
• IEEE 802.3at PoE+ provides up to 30 W per port to IEEE
802.3at-complaint PoE/PoE+-powered devices such as
video IP phones, IEEE 802.11n wireless access points, and
advanced pan/zoom/tilt security cameras
• Pre-standard PoE support detects and provides power to
pre-standard PoE devices (refer to the list of supported
devices in the product FAQs, which can be accessed at
www.hpe.com/networking)
• Choice of uplinks
- SFP+ uplink models provide ber-optic (up to 70 km) or
direct-attach-cable (DAC) connectivity
- 10GBASE-T uplink models oer 10GbE speeds, using
standard RJ-45 connectors and standard twisted-pair
cabling up to 100 m
• Auto-MDIX provides automatic adjustments for straight-
through or crossover cables on all RJ-45 ports
• IPv6
- IPv6 host enables switch management in an IPv6 network
- Dual stack (IPv4 and IPv6) transitions IPv4 to IPv6,
supporting connectivity for both protocols
- MLD snooping forwards IPv6 multicast trac to the
appropriate interface
- IPv6 ACL/QoS supports ACL and QoS for IPv6 trac
- IPv6 routing supports static, RIPng, OSPFv3 routing
protocols
- 6in4 tunneling supports encapsulation of IPv6 trac in
IPv4 packets
- Security provides RA guard, DHCPv6 protection, dynamic
IPv6 lockdown, and ND snooping










