HP EliteDesk 800 G1 Desktop Mini HP ProDesk 600 G1 Desktop Mini Maintenance & Service Guide

Hard drive
Description Spare part number
1 TB, 7200 rpm, hard drive, 2.5-inch, SSHD 724937-001
500 GB, 7200 rpm hard drive, 2.5-inch 745135-001
500 GB, 7200 rpm, hard drive, 2.5-inch, SSHD 724938-001
500 GB, 7200 rpm hard drive, 2.5-inch, SED 745136-001
256 GB solid-state drive (SSD), self-encrypting (SED) 746141-001
180 GB solid-state drive (SSD), SATA 6.0, MLC 754076-001
128 GB solid-state drive (SSD) 665961-001
128 GB solid-state drive (SSD), Self-encrypting Drive (SED), SATA 6.0 746140-001
120 GB solid-state drive (SSD), SATA 6.0, MLC 756459-001
NOTE: Before you remove the old hard drive, be sure to back up the data from the old hard drive so
that you can transfer the data to the new hard drive.
1. Prepare the computer for disassembly (see Preparing to disassemble the computer on page 25).
2. Remove the access panel.
3. Disconnect the hard drive power cable (1) and data cable (2) from the system board.
28 Chapter 5 Removal and Replacement Procedures