User Manual

Connecting the cables
NOTE: The monitor ships with select cables. Not all cables shown in this section are included with the
monitor.
1. Place the monitor in a convenient, well-ventilated location near the computer.
2. Before connecting the cables, route the cables through the cable routing hole in the center of the stand.
3. Connect a video cable.
NOTE: The monitor will automatically determine which inputs have valid video signals. The inputs can
be selected by pressing the Next Input button on the front panel or through the On-Screen Display
(OSD) by pressing the Menu button and selecting Input Control.
●
Connect a DVI-D cable to the DVI-D connector on the rear of the monitor and the other end to the
DVI-D connector on the source device.
8 Chapter 3 Setting up the monitor