HP Pavilion x360 Convertible PC (model numbers: 13-s000 through 13-s099) Maintenance and Service Guide

Speakers
Description Spare part number
Speaker Kit (includes left and right speakers and cables) 809838-001
Before removing the speakers, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the keyboard/top cover (see Keyboard/top cover on page 22).
5. Disconnect the battery cable from the system board (see Battery on page 25).
6. Remove the WLAN module (see WLAN module on page 29).
7. Remove the system board (see System board on page 31).
Remove the speakers:
1. Release the speaker cables from the retention clips (1) built into the base enclosure.
2. Remove the three Phillips PM2.0×5.8 shoulder screws (2) that secure the speakers to
the base enclosure.
3. Remove the speakers (3).
NOTE: When removing the speakers, make note of the location of the six rubber isolators (4).
Removal of or damage to these isolators can cause degradation to speaker performance.
Reverse this procedure to install the speakers.
Speakers 37