HP Pavilion x360 Convertible PC (model numbers: 13-s000 through 13-s099) Maintenance and Service Guide

a. Remove the display panel assembly.
b. Remove the display hinges.
c. Remove the Phillips PM2.0×4.1 screw (1) that secures the display hinge cover to the display hinge.
d. Remove the rubber cable retainer (2) from inside the hinge cover.
e. Remove the display hinge cover (3).
The display hinge covers are available using the following spare part numbers:
●
809540-001 – For use only on computer models in natural silver finish
●
809541-001 – For use only on computer models in sunset red finish
●
809828-001 – For use only on computer models in violet purple finish
10. If it is necessary to replace the WLAN antenna cables and transceivers:
a. Remove the display panel assembly.
b. Remove the left display hinge.
c. Release the tabs (1) on the top edge, left side, and left hinge area of the display enclosure that
secure the WLAN antenna cables.
d. Detach the WLAN antenna transceivers (2) from the display enclosure. (The WLAN antenna
transceivers are attached to the display enclosure with double-sided adhesive.)
e. Release the WLAN antenna cables from the retention clips (3) and channels built into the left edge
of the display enclosure.
Display assembly 43